Instructions / Assembly

9 | P a g e
This the next screen you
will see, click “Add
device”, a scanner view
window will open, scan
the QR code on the back
of your hub.
You can add the hub by
either scan the QR code,
or, select “New GPRS
Hub” then type in the
serial number below QR
code.
Now you need to pair the
Hub to the thermostat.
Once the Hub is added, a
new window will let you
add a device, select
“scan QR code or
barcode” to scan in the
QR code on the
thermostat, which is
located on the side of the
thermostat.
Now you are ready to adjust your humidity and thermostat settings on your Remington Solar
attic fan. Your app should now show the Smart Thermostat icon.
Once you’re in the app, you’ll see the following screens to which will allow you to adjust your
temperature and humidity settings. You’ll also be able to turn your fan on or off. It will also
show your temperature and humidity conditions in your attic.