Instructions / Assembly

5 | P a g e
WI-FI THERMOSTAT INSTALLATION INSTRUCTIONS
OPTIONAL ON ALL REMINGTON SOLAR ATTIC FANS
(STANDARD ON SF-WF40-BLK)
How to Install the Remington Solar Smart Wi-Fi Thermostat / Humidistat
They will connect as shown below:
Fig. A Fig. B
.
Fig. B is the Wi-Fi hub
and components. It will
connect to the Wi-Fi
router you use at home for
all your household
Internet connections.
Simply plug it in to one of
the router ports on the
back. It will also need
power, so plug it into a
110V power source using
the plug provided.
Each fan comes with the factory pre-set
thermostat/humidistat device to the left.
You will replace it with the Wi-Fi
thermostat box (Fig. A)
Fig. A is the replacement
thermostat/humidistat. Simply unplug
the old thermostat at the plug end of the
wire, and plug in the new Wi-Fi
thermostat. You may attach the white box
to a stud or frame in your attic. Make sure
the antenna is connected.