User's Manual

V1.0
3. Configuring the RelyanceHub
3.1 Establishing Local access to the RelyanceHub
Once the unit is powered up, the system settings of the RelyanceHub (also called as
AHS) can be accessed locally with a laptop in one of two ways:
a) Direct LAN connection between Laptop and Hub
Using a standard Ethernet cable, connect one end of the cable to the LAN port of
the Hub. Connect the other end of the cable to your laptop.
b) Connect through Wi-Fi
On your laptop, search for available hotspots.
Look for an access point with name as:
AHS_REL_< last 6 characters of MAC >
Note: The MAC address is printed
on the back side of the RelyanceHub.
Connect to this Access point.
When asked for the password,
give the password as:
am<last 6 characters of MAC>
In this example, the password will be am082CF1
3.2 Login to the RelyanceHub
Open a web browser and enter the URL as http://192.168.100.1
The login page will be displayed: