User guide

ENGLISH
50
2. Applying the Database Builder
In order to apply the Database Builder and to ana-
lyze your USB data carrier proceed as follows:
Starttheinstalledprogram.Intherststepse-
lect the desired USB data carrier and then click
on„Build“.
Your USB data carrier will now be analyzed.
Afterasuccessfulanalysisyoucanclosethepro-
gram. Your USB data carrier has now been suc-
cessfully analyzed and is ready for application
with the RMP-3.
NOTE! If the Database Builder causes problems
under Windows Vista, please refer to the fol-
lowing trouble shooting.
Under WindowsVistait is not possibletocarry
out the Database Builder. This can be caused by
UAClimitation.
Click on the right mouse button in order to carry
outtheDatabaseBuilderwiththeoption„Runas
administrator“.
Asnextstepclickon„Allow“inordertocarryout
the Database Builder.
IM_RMP3_GB.indd 50 03.11.2009 09:18:43