Instruction Manual
By holding the Source Select Button -48- for a longer period of time you will change to MIDI Mode. The
Source Select Button glows purple, „DeckA CH1“ appears on the display. The remark „DeckA CH1“ means
that all elements are sending on MIDI channel 1. By pushing the Reverse/Deck Switch Button you can
switch from channel 1 (Deck A) to channel 4 (Deck D). This way an easy handling of up to 4 virtual players
becomes possible. Further information can be found in the chapter „Submenu“ and in the TRAKTOR PRO
mapping.
Each element of the player sends MIDI commands. Please also refer to the MIDI map included in this ma-
nual.
By pushing the Reverse/Deck Switch Button -10- it is possible to comfortably switch between 4 MIDI chan-
nels. The current channel and as the case may be the virtual deck drive will appear on the display. If, for
example, you would like to control 4 virtual decks with one RMP-3 you can switch between the virtual
decks via the Deck Switch Button. The channel presets can be adjusted in the submenu (also see chapter
Submenu).
By holding the Shift Button -46- a second function of any element can be called up. This way the number of
control elements will be doubled. Please also refer to the included MIDI Map in this manual.
The large, touch-sensitive Jog Wheel -18- can send MIDI commands in four different modes:
Sends data when turning/touching the Jog Wheel.
With activated X-Parameter Button -25- the Jog Wheel sends different data.
With activated Y-Parameter Button -26- the Jog Wheel sends different data.
When holding the Shift button -46- the Jog Wheel also sends different data.
Generally speaking each element is freely editable.
For further information please refer to the chapter „Submenu“.
The RMP-3 is implemented as MIDI controller in the most current TRAKTOR PRO versions and it can
be selected as controller in the defaults. The functions are assigned as follows: