Operation Manual
ENGLISH
22
-
Attachtothisoutput-26-headphoneswitha6.3mmjackcableformonitoring.
Usethewheel-27-toadjustthevolumeoftheheadphones.
Switchtoselectthecorrectvoltageofyourcountry,either115Vor230V.
Connecttheoutputhubs-29-withtheLineINhubsofyourmixingconsoleoramplier.
Connectthedigitaloutputhub-30-toadevicethatfeaturesadigitalinput,forexampleaCDburner,
MD recorder, digital mixer or audio card.
Switch your device on or off with this switch.
Connect the connection hub -32- with a line cord and insert it into an outlet.
SAMPLING
This chapter details the possibilities and settings of the mighty on-board sampler of your device.
Aloopisthepermanentrepetitionofasequencebetweenachosenloopstartingpointandachosen
loopendpoint.SelectaloopstartingpointbypressingtheLoopINbutton-12-.SelecttheLoopEnd
pointbypressingtheLoopOUTbutton-13-.TheplayergoesautomaticallyintoLoopmodeandthe
Reloopdisplayashes.Thesequencethuschosenisseamlesslyre-playeduntiltheLoopOUTbutton
- 13- is pressed a second time. The player seamlessly goes into Play mode. To prompt the last played
loopagainst,presstheReloopbutton-14-.TheplayergoesautomaticallyintoLoopmode.
NOTES:
-
-16- and then one of the four memory buttons -15- The loop thus set is now saved in the chosen
IM_RMP1_Scratch_MK2_GB.indd 22 02.11.2009 16:51:43