Operation Manual
ENGLISH
15
•The device must not be operated after being taken from a cold environment into a warm environ-
ment. The condensation caused hereby may destroy your device. Do not switch on or operate the
device until it has reached ambient temperature!
•Controls and switches should never be treated with spray-on cleaning agents and lubricants. This
deviceshouldonlybecleanedwithadampcloth.Neverusesolventsorcleaninguidswithapet-
roleum base for cleaning.
•Whenrelocating,thedeviceshouldbetransportedinitsoriginalpackaging.
•Whenstartingoperationthecross-fadersandvolumecontrolsofyourampliermustbesettomi-
nimumlevel.Bringtheloudspeakerswitchesintothe„OFF“position.Waitbetween8to10seconds
before increasing the volume to avoid shot noise created by transient effect, which could cause
damage to loudspeakers and the diplexer.
•Alwaysensurethatyouplacescratch-free,cleanCDsintotheplayer.WhenplacingtheCDintothe
tray, your hands should also be clean.
•To keep the laser head clean always close the CD tray.
•Devices supplied by voltage should not be left in the hands of children. Please exercise particular
care when in the presence of children.
•Atcommercialfacilitiestheregulationsforthepreventionofaccidentsasstipulatedbytheasso-
ciation of professional associations must be observed.
•Atschools,trainingfacilities,hobbyandself-helpworkshopstheoperationofthedevicemustbe
monitored with responsibility by trained staff.
•Keep this operation manual in a safe place for later reference in the event of questions or problems.
ATTENTION: In the unlikely event of a return, please use the original packaging only to proper-
-
nufacturer does not accept liability for damage caused during transport as a result of improper
•This device is a professional CD player for replay of conventional CDs and MP3-CDs. To listen to
CDs connect this equipment to a mixing console.
•Thisproductisauthorisedforconnectionto230V,50Hzandisdesignedexclusivelyforindoor
application.
•If the device is used for any other purposes than those described in the operation manual, dama-
ge can be caused to the product, leading to the exclusion of warranty rights. Moreover, any other
applicationthatdoesnotcomplywiththespeciedpurposeharboursriskssuchasshortcircuit,
re,electricshock,etc.
•T
he serial number determined by the manufacturer must never be removed to uphold the warranty rights.
MAINTENANCE
•Check the technical safety of the device regularly for damage to the mains line or the casing, as
well as for wear of wear parts such as rotary and sliding switches.
•If it is to be assumed that the safe operation is no longer feasible then the device must be discon-
nectedandsecuredagainstaccidentaluse.Alwaysdisconnectmainsplugfromtheoutlet!
•It must be assumed that a safe operation is no longer feasible if the device bears visible defects,
if the device no longer functions, following longer storage under unfavourable conditions or after
major transport stress.
-
The inside of the device does not contain any parts which are
IM_RMP1_Scratch_MK2_GB.indd 15 02.11.2009 16:51:41