Operation Manual

ENGLISH
30
5. Now start the rmware update tool from the installation CD and open the rmware le that suits
your device.
6. Carry out the rmware update by clicking the „Start“ button.
7. The new rmware will now be transmitted to the device.
8. After a successful update all LEDs of the controller will be lit.
9. After the update has been completed successfully please end the rmware update tool and re-
boot Mixage via the On/Off Button -B41-
10. After a successful update the rmware can be checked again. Please see item 6.1 „Firmware
Check“ under 6. „Updates & Support“.