User Manual



T6 
By pressing one of the buttons the current
deck can be determined. The LEDs change
accordingly.




By using one of the cue buttons the monitoring
function for the current deck will be activated.

 

T7 
Via the encoder the effect‘s intensitsy
can be adjusted.

If the Advanced Effect section is selected, the
effect can be changed by turning the encoder.
T8 
Hereby the effect‘s intensity can be
changed quickly.

The fader changes the headphones‘ volume.
Only available in stand alone mode.
T9 
In Advanced Effect Mode the parameters
can be changed herewith.

If Chained Effect Mode is used, the single
effects can be controlled via the encoder.




Hereby the relative effect can be changed in
Chained Effect Mode.




Pressing the encoder activates/deactivates
the equalizer‘s kill function. The rst encoder
from the left of this section lters the high
frequencies, the second encoder lters the
mid frequencies and the third encoder lters
the low frequencies.
T10 
In Advanced Effect Mode the parameters
can be changed quickly hereby.

If Chained Effect Mode is used the single
effects can be controlled via the faders.




By moving the fader the equalizer‘s parame-
ters can be adjusted. The rst fader from the
left controls the high frequencies, the second
fader controls the mid frequencies and the
third fader controlls the low frequencies that
are audible in the following.
T11 
Activates the Advanced FX Section cor-
responding to the deck. (Deck A --> FX1,
Deck B --> FX2, Deck C --> FX3, Deck D
--> FX4)
T12 
In Advanced Effect Mode the effect can
be reset hereby.

Activates/deactivates the rst effect in
Chained Effect Mode.
T13 
Activates/deactivates the Effect Button
1 in Advanced Effect Mode.

Activates/deactivates the second effect
in Chained Effect Mode.
T14 
Activates/deactivates the Effect Button
2 in Advanced Effect Mode.

Activates/deactivates the third effect in
Chained Effect Mode.
T15 
By turning the encoder varies the set
loop‘s length.
By pressing the encoder the Loop Acti-
ve function is activated/deactivated.

Herewith the current deck‘s pitch fader can be
adjusted exactly.