User Manual
If several Contour devices are in use, the various in- and out-ports for the different channels have
to be divided among the devices.
Example: For 2 Contours the device entries should be manipulated as follows:
After connecting and conguring Reloop Contour correctly for the DJ software, Traktor can now be
used. If Traktor Pro is used it is possible to fully exploit the Contour user interface. There are some
differences for Traktor LE regarding effect control, the number of usable decks and the hot cue
assignment.
Contour V* (CH1) Reloop CONTOUR Reloop CONTOUR
Contour V* (CH2) Reloop CONTOUR Reloop CONTOUR
Contour V* (CH3) Reloop CONTOUR Reloop CONTOUR
Contour V* (CH4) Reloop CONTOUR Reloop CONTOUR
Contour V* (Master) All ports None
Contour V* (CH1) Reloop CONTOUR Reloop CONTOUR
Contour V* (CH2) Reloop CONTOUR2 Reloop CONTOUR2
Contour V* (CH3) Reloop CONTOUR Reloop CONTOUR
Contour V* (CH4) Reloop CONTOUR2 Reloop CONTOUR2
Contour V* (Master) All ports None
T1
Hereby the FX 1 unit can be assigned to the
current deck (see -T6-).
The current deck becomes the master deck.
T2
Hereby the FX2 unit can be assigned to
the current deck (see -T6-).
Via this function it is possible to arrange the
set cue points and loops at the grid.
T3
Hereby the FX 3 unit can be assigned
to the current deck (see -T6-).
Triggerd hot cues are geared to the master
deck‘s beat. Convenient for real-time mixing.
T4
Hereby the FX 4 unit can be assigned to the
current deck (see -T6-).
Sets back all LFO-based effects.
T5
- By turning the encoder you can scroll
through the track directory.
- By pressing the encoder you can load
the selected track to the current deck.
- By turning the encoder you can navigate the
folder direcotry.
- By pressing the encoder you can open/close
the selected direcotry.