User Guide

DJ-FX
The DJ-FX in Serato DJ are powered by iZotope™.
Click the FX tab to open the FX panel. Select either 1, 2, 3,
4 or M to assign the selected effect bank to a deck or Master Output.
There are two available modes in the DJ-FX. Single FX Mode allows you
to select one effect per FX bank, and has multiple parameters that can
be adjusted. Multi FX Mode allows you to select up to three effects per
FX bank, and adjust only one parameter, the FX Depth. The same effects
available in Single FX mode are available in Multi FX mode, as well some
additional presets.
You can select between the two FX modes by clicking either the Single FX
mode button or Multi FX mode button
MIXON4 Control Single FX Mode Multi FX Mode Shift
ON (Button 1) Effect On/Off Slot 1 Effect On/Off Slot 1 Select Effect
ON (Button 2) Adjust FX Parameter 2 Slot 2 Effect On/Off Slot 2 Select Effect
ON (Button 3) Adjust FX Parameter 4 Slot 3 Effect On/Off Slot 3 Select Effect
TAP Tap to the desired FX tempo. To return to
AUTO mode, press and hold
Tap to the desired FX tempo. To return to AUTO
mode, press and hold
Toggle between Single/Multi
FX Modes
FX KNOB 1 Adjust FX Parameter 1 Adjust Slot 1 FX Parameter
FX KNOB 2 Adjust FX Parameter 3 Adjust Slot 2 FX Parameter
FX KNOB 3 Adjust FX Parameter 5 Adjust Slot 3 FX Parameter
FX KNOB 4 Adjusts Beat Multiplier Adjusts Beat Multiplier Press down with Shift held to
reset Beat Multiplier to default
value (1)