User Guide
Beat Jump
To activate Beat Jump, open the Setup screen and under the DJ
preferences tab turn on “Show Beat Jump Controls”.
When you close the Setup screen you will see Beat Jump controls
underneath the existing Auto Loop values on each deck. Checking
this box will turn on Beat Jump features in the deck area and let
you control Beat Jump from on your supported Serato DJ hardware.
When the Beat Jump option is enabled, controllers with 8
performance pads that have an AUTO LOOP or LOOP ROLL mode
will use the bottom row of 4 pads (pads 5-8) as Beat Jump controls.
This is designed to mirror the change in deck Auto Loop area (from
8 Auto Loop sizes to 4 Auto Loop sizes + Beat Jump controls).
Performance
Pad Function
Pad 5 Pad 6 Pad 7 Pad 8
Beat Jump
disabled
Auto Loop/
Loop Roll 5
Auto Loop/
Loop Roll 6
Auto Loop/
Loop Roll 7
Auto Loop/
Loop Roll 8
Beat Jump
enabled
Beat Jump
Left
Halve Beat
Jump Size
Double Beat
Jump Size
Beat Jump
Right
Controllers with Loop Shift controls can now perform a Beat Jump
by enabling Beat Jump in the Setup screen. Regular Loop Shift is
still available when Beat Jump is disabled in the Setup screen.
MIDI
The MIDI feature in Serato DJ provides the ability to remap Serato DJ
software functions to your primary Serato DJ controller, interface or mixer.
You can also assign controls to a secondary MIDI controller to further
enhance your performance.
For more information on MIDI mapping with Serato DJ click here.
To remap your supported Serato DJ device, open the SETUP screen and
click the MIDI tab. If your Serato DJ device supports hardware remapping it
will show up in the MIDI Devices list at the top.
Select your connected device from the MIDI Devices list and make sure the
“Allow Serato Hardware Remapping” option is checked.
Once checked, the MIDI assign button at the top of the screen will become
available for you to start remapping.
You can save, edit or delete MIDI presets in the MIDI tab of the SETUP
screen. Clicking ‘Restore Defaults’ will erase any custom mappings for all
connected devices and revert their functions back to default.
Download the Serato DJ software manual for further information.
NOTE: Ofcial Serato Accessories do not currently support user remapping.
Hardware features that cannot be remapped at this stage are Jogwheels/
Platters, Input Switches, Shift buttons and Performance Pad Mode buttons.
Re-mapping any pad(s) in Hot Cue mode will also re-map the same pad in
Saved Flip mode and vice versa.