QUICK-START GUIDE RELOOP MIXON4
Installation and Setup The Reloop MIXON4 is a class compliant USB plug and play device for Mac, however requires drivers for Windows. You will find these on Reloop’s website. NOTE: Please ensure you have the latest available drivers AND firmware updates, which may be required in order to be compatible with Serato DJ. 1. 2. 3. Download and install the latest version of Serato DJ from http://serato.com/dj/downloads Connect your Reloop MIXON4 to an available USB Port. Open Serato DJ.
Controller 1 2 3 4 5 6 7 8 9 10 12 11 32 31 30 29 13 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14
NOTE: The SHIFT button is used with other buttons that have shift modifier functions. # Reloop MIXON4 Control Function Shift Function 1 FX 1-3 DJ-FX slot 1-3 Effect On/Off/Adjust Slot 1-3 FX Parameter Slot 1-3 Select Effect 2 BEATS Turn to adjust Beats Multiplier. Push in to reset multiplier value. 3 TAP TEMPO Tap to the desired FX tempo. To return to AUTO mode, press and hold.
# Reloop MIXON4 Control Function Shift Function 20 CHANNEL FADER Adjust channel volume 21 LOAD Cues selected channel for headphone monitoring 1/2/3/4 22 DECK SELECT Change deck layer 23 SHIFT Used with other controls that have SHIFT modifier functions 24 PLAY/PAUSE Toggle play or pause on selected deck Stutter Play 25 CUE Cues from temp cue point/Set Temp Cue point Load previous track 26 SYNC Turns SYNC On Turns SYNC Off 27 PARAMETER Adjusts Parameter1 in performance pad mode
1 2 3 5 4 6 7 9 # 8 10 11 Reloop MIXON4 Control # Reloop MIXON4 Control 1 KENGSINGTON LOCK 7 POWER SWITCH 2 MASTER OUT 1 (XLR) 8 PSU INPUT 3 MASTER OUT 2 (RCA) 9 1/4”/1/8” HEADPHONE OUTPUT 4 BOOTH OUT (TRS) 10 MIC INPUT 5 iOS 11 MIC GAIN 6 USB
Looping Serato Flip You have up to 8 loops per track in Serato DJ, and the choice between either manual or auto loops. To store the currently active or most recently created loop, click in the loop tab in the software. The Loop Size LED on the MIXON4 will light up to indicate the currently selected loop size. Flip is an Expansion Pack for Serato DJ. Flip controls are only available once the Flip expansion pack has been purchased and activated.
DJ-FX The DJ-FX in Serato DJ are powered by iZotope™. Click the FX tab to open the FX panel. Select either 1, 2, 3, 4 or M to assign the selected effect bank to a deck or Master Output. There are two available modes in the DJ-FX. Single FX Mode allows you to select one effect per FX bank, and has multiple parameters that can be adjusted. Multi FX Mode allows you to select up to three effects per FX bank, and adjust only one parameter, the FX Depth.
Performance Pads The Reloop MIXON4 RGB performance pads have 9 different modes you can select. The first four modes are; Hot Cue, Loop Roll, Sampler and Slicer. The second four modes (Cue Loop, Saved Loop, Pitch Play, and Slicer Loop) are activated by pressing the performance pad mode buttons a second time. Sampler Velocity mode can can activated by pressing and holding Sampler. Pressing and holding Hot Cue will enable Quantize. • Hot Cue Mode: When pressing pads 1-8 you can add up to 8 Cue Points.
Beat Jump MIDI To activate Beat Jump, open the Setup screen and under the DJ preferences tab turn on “Show Beat Jump Controls”. The MIDI feature in Serato DJ provides the ability to remap Serato DJ software functions to your primary Serato DJ controller, interface or mixer. You can also assign controls to a secondary MIDI controller to further enhance your performance. For more information on MIDI mapping with Serato DJ click here.
Using the Tool Tips Click on the icon to enable Tool Tips. This is located in between the MIDI and setup button in the top right hand corner of the screen. Tool Tips provide a handy way to learn the various features of Serato DJ. Move the mouse over a section of the screen to bring up a context sensitive tool tip. Holding the mouse over the button with Tool Tips turned on will show you a list of all keyboard shortcuts. For more information about how to use Serato DJ, please go to our website www.serato.
