Installation Guide

2
INTRODUCTION
FIRST THINGS FIRST
Forme Towel Warmers were designed and built with simplicity in mind. Constructed of high quality 304
stainless steel expertly welded in unique designs, Forme towel warmers are safe and easy to use.
While most of our models require hard-wiring to a power source (except plug-in models) they do not require
a control. Our proprietary heating technology inside the towel warmer will ensure the device reaches 145°F
degrees in 3 minutes.
If your goal is to get the comfort of a nice warm towel after the bath or shower, then wire it to your light
switch. By the time you’re done, your towel will be wonderfully warm.
If the plan is to dry the towels faster in an active household or prevent the discomfort of moldy towels in a
poorly ventilated space, then wire it to a separate switch which you can leave on separately from the lights or fan.
Mounting the towel warmer is very simple with the enclosed instructions. Make sure to read this manual for
the do’s and dont’s and solicit the help of qualified tradesmen when necessary.
Carefully unpack your towel warmer and ensure all pieces are included for a successful installation.
Contact Forme Agents FTR Products with any questions on the contents of your order. An electrical tradesman needs
to check the resistance and continuity of the heating cable coming from the towel warmer with an ohm-meter.
Check the chart below and ensure your reading is within 10% of the approved resistance reading.
Delete single bars form table?
CODE TUBE SHAPE BARS FINISH VOLTAGE AMPERAGE RESISTANCE
HTR-TS0701 Square 7 Polished Stainless 120V 0.67A 200Ω
HTR-TS0701BK Square 7 Black Powder Coating 120V 0.67A 200Ω
HTR-TS0701BSS Square 7 Brushed Stainless 120V 0.67A 200Ω
HTR-TS0701GMG Square 7 Brushed Gun Metal Grey PVD 120V 0.67A 200Ω
HTR-TS0701RG Square 7 Brushed Rose Gold PVD 120V 0.67A 200Ω
HTR-TS0701GLD Square 7 Brushed Brass Gold PVD 120V 0.67A 200Ω
HTR-TR0701 Round 7 Polished Stainless 120V 0.67A 200Ω
HTR-TR0701BK Round 7 Black Powder Coating 120V 0.67A 200Ω
HTR-TR0701BSS Round 7 Brushed Stainless 120V 0.67A 200Ω
HTR-TR0701GMG Round 7 Brushed Gun Metal Grey PVD 120V 0.67A 200Ω
HTR-TR0701RG Round 7 Brushed Rose Gold PVD 120V 0.67A 200Ω
HTR-TR0701GLD Round 7 Brushed Brass Gold PVD 120V 0.67A 200Ω
HTR-5HS9065 Square 5 Polished Stainless 120V 0.5A 200Ω
HTR-5HS9065BK Square 5 Black Powder Coating 120V 0.5A 200Ω
HTR-TS0602M Square 6 Polished Stainless 120V 0.67A 200Ω
HTR-TS1870M Square 18 Polished Stainless 120V 2A 80Ω
HTR7006206OP Round 6 Polished Stainless 120V 0.5A 200Ω
50mm Woodscrews x3
Brackets x4
Fixing screws x3
Wall plugs x3
Fixing screws x2
Mushrooms x3
Grub screws x4
Fixing x1
Junction plate x1
Template for tile fixing x1
Allen key x1
1 2 3
5 6 7
9 10
4
8
11
50mm Woodscrews x3
Fixing screws x3
Wall plugs x3
Fixing screws x1
Mushrooms x3
Grub screws x4
Allen key x1
1 2 3
5 6 7
9 10
4
8
11
Fixing x1
Brackets x4
Junction plate x1
Template for tile fixing x1
50mm Woodscrews x3
Wall plugs x3 Mushrooms x3
Grub screws x4
Allen key x1
1 2 3
5 6 7
9 10
4
8
11
Brackets x4
Fixing x1
Junction plate x1
Template for tile fixing x1
Fixing screws x3 Fixing screws x2
HTR-5HS9065 / HTR-5HS9065BK towel warmer fixing kit includes:
Round towel warmer fixing kit includes:
Square towel warmer fixing kit includes:
TOWEL WARMER INSTALLATION INSTRUCTIONS
3
TOWEL WARMER INSTALLATION INSTRUCTIONS
2