Owner`s manual

5 6

CONTROLS and INDICATORS

FRONT PANEL

All Buttons on the Front Panel are Programmable Function (PF) Buttons, configured

according to your system requirements and can be programmed by your dealer. The

instructions below refer to a typically configured radio.

1. VOL/PWR Knob

Turn this control clockwise to switch the radio "on" and increase the volume. Turn it

counterclockwise until a click is heard to switch the radio "off".

2. BUSY/TX Indicator

Indicates transceiver Transmit/Receive Status

Steady Red: Transmitting in progress

Steady Green: RX/Busy Channel

3. UP/DOWN Buttons

Pressing either button changes the current channel (and displayed name).

4. LCD

The 8-character alphanumeric display shows channel names, status and identity

information, and error messages.

5. Microphone Jack

Connect the microphone plug to this jack.

6. [A]-[D] Buttons (Programmable Function Buttons)

These buttons can be programmed by your dealer to be assigned for special

applications for selecting High/Low power, Monitor, Talk-Around, etc as determined

by your system requirements.