User manual

32
AND
Unmutes only when both CTCSS/DCS
and Optional Signalling
(2-Tone/5-Tone/DTMF/HDC2400
TM
) are
received and matches the preset one
on selected channel.
Activated only when both
CTCSS/DCS and Optional Signalling
(2-Tone/5-Tone/DTMF/ HDC2400
TM
)
are received and matches the preset
one on selected channel.
OR
Unmutes when either CTCSS/DCS or
Optional Signalling (2-Tone/5-Tone/
DTMF/HDC2400
TM
) is received and
matches the preset one on selected
channel.
Activated only when either
CTCSS/DCS or Optional Signalling
(2-Tone/5-Tone/DTMF/HDC2400
TM
) is
received and matches the preset one
on selected channel.
? Auto Reset
Signalling squelch will automatically turn back on when no signal is received for a preset
period of time.
User Set Mode
Turn the power on while holding down the [PF1] key, the radio enters User Set mode after
correct power-on password is entered (if Power-On Password is set). In User Set mode,
the following menus can be selected:
Main Menu
No. Menu Item LCD Display
1 Function Set Function Set
2 Power On Text Power On Text
3 Power On Password PWR Password
4 UST Code UST Code
5 Hook & Moni Hook & Moni
6 Key Assignment Key Assign
Press the [PF6] key to enter the selected menu. In User Set mode, turn the power off and
back on to enter the Conventional mode.
In User Set mode, you can operate as following:
1. Turn the Selector Knob to make settings;
2. Press the [PF6] key to save the settings and enter the next setting item;
3. Press [Up]/[Down] to select the setting item upwards/downwards without saving
the settings;
4. Press the [PF1] key to return to user set menu mode.
? Function Set
Select “Function Set” in main menu and press the [PF6] key to make settings as
following:
Function Set
No. Function Setting Display Remarks