User manual

21
If this feature is activated, enter a preset DTMF number (16 digits maximum) in receive
mode, then press the [PTT] key to place the call. The DTMF number scrolls across the
LCD display as it is entered, and its corresponding audible tone sounds.
Notes:
? If you enter a wrong digit or decide not to dial the number, press any key other than the
power switch on the front panel to exit.
? The [D] key can be programmed by your dealer as a null tone. This also means that “D”
tone is not transmitted when “D” is entered. Instead, “D” is used for a pause time
(programmable by your dealer).
? Dial Speed
Your dealer can select dial speed at 6, 8, 10 or 15 digits per second.
This is designed to reduce false decoder operation by providing a fixed time period
between digits. Default: 10 digits per second
? Store DTMF Numbers
You can store DTMF numbers (16 digits maximum) in each of the 32 Auto Dial memory
locations (01~ 32).
1. Press the [#] key, “D----------” appears on the LCD.
2. Enter the DTMF number (16 digits maximum).
You can enter the digits 0-9, A-F.
To enter A,B,C,D,E,F, hold down the [PTT] key, then enter 2, 5, 8, 0, *, # respectively.
3. Press the [#] key, “------” appears on the LCD indicating the memory location.
4. Enter the desired memory location number (01~ 32).
5. Press the [#] key again to store the DTMF number into the memory location.
If you enter a wrong digit or decide not to dial the number, press any key other than the
power switch on the front panel to exit.
? Confirm Stored DTMF Numbers
1. Press the [*] key, “A---” appears on the LCD.
2. Enter the desired memory location number (01~ 32).
The stored DTMF number or caller ID is displayed on the LCD. Press any key other
than the [PTT] key, the original display is restored.
? Dial Stored DTMF Numbers
1. Press the [*] key, “A---” appears on the LCD.
2. Enter the desired memory location number (01~ 32).
The stored DTMF number or caller ID is displayed on the LCD.
3. Press the [PTT] key to place the call.
? Clear Stored DTMF Numbers
1. Press the [#] key, “D----------” appears on the LCD.
2. Press the [#] key again, “D Clear” appears on the LCD.
3. Enter the desired memory location number (01~ 32).