User manual

19
? Scan Restart
When the radio stops on a busy channel, scanning can be restarted according to the
restart mode, which can be programmed by the dealer as carrier-operated scan or
time-operated scan.
? Carrier Operated Scan
Scanning remains on an active channel until there are no activities; while the channel is
free, the radio remains on the channel for the programmed Dropout Delay Time
(programmed by your dealer) before it resumes scanning.
? Time Operated Scan
Scanning remains on the active channel for only the programmed Dropout Delay Time
(programmed by your dealer) before it resumes scanning. After the expiration of
Dropout Delay Time, the radio will begin scanning other channels even if the channel
is still busy.
? Dual Priority Scan
If your dealer has programmed dual priority channels, the radio will periodically detect the
activity on priority channels while stopping on non-priority channels. When any activity is
detected on the priority channels, the radio will switch to the priority channels for
communications.
“P1” appears on the LCD when the channel is set as Priority 1, “P2” appears when set as
Priority2, and “PP” when set as both Priority 1 and Priority 2.
? Operator Selectable Priority Channel
If priority channel is programmed by your dealer as “Operator Selectable”, you can set the
current channel as priority or non-priority channel:
Press the key programmed as [MONI] twice while holding down the key programmed as
[SCN], the current channel is changed to "Priority 2".
Press the [MONI] key three times while holding down the [SCN] key, the current channel
is changed to "Priority 1".
Press the [MONI] key four times while holding down the [SCN] key, the current channel
restores to original setting.
? Scan Add/Delete
This feature allows you to add/delete a channel to/from the scan list in the non-scan
mode.
1. Select the channels to be added/ deleted by using the channel selector knob.
2. Press the key programmed as [Add/Del] to toggle between ADD and DELETE.
“ ”appears on the LCD when a channel is added.
Note: The radio only scans the channels that have been added to the scan list.
? Look Back Temporary Disable
When scanning looks back and stops on a priority channel, press the key programmed as
[Add/Del] to deactivate the Look Back function.