Specifications

RMU800A SERVICE MANUAL
－ 48 －
Notes:
1) If a transmission starts with the "*" or "#" tone, the radio compares the tone duration with the set
"First Digit Time", and adapts the longer time of the two to the first "*" or "#" tone.
2) DTMF Transmit Delay Time sets the delay time from the starting of transmission to the sending of
the first DTMF digit. Making this value longer has a similar effect as setting the First Digit Time
longer. When using DTMF and CTCSS/CDCSS it is recommended to set this parameter to 100 ms
or more.
3) If automatic DTMF encode function (PTT ID, Auto Dial, Store & Send and Dial ID) is used for DTMF
Call, DTMF Speed must be set 6, 8 or 10 digits per second.
D Code
DTMF
DKey D-Code
Pause1-16s
DTMF
DKeyPause 1
8 D Key Assignment
DTMF
DkeyPause 16
Side Tone Off
DTM F
SideTone Off
9 DTMF Side Tone
Side Tone On
DTM F
SideTone On
Auto Dial Off AutoDial Off
10 Auto Dial
Auto Dial On AutoDial On
AutoDialP Off AutoDP Off
11
Auto Dial
Programming
AutoDialP On AutoDP On
Manual Dial Off ManuDial Off Hold [PTT], then dial
12 Manual Dial
Manual Dial On ManuDial On
Auto Tx Off KeyAutoTxOff
Not sent DTMF when only DTMF keys
are pressed.
13 Keypad Auto Tx
Auto Tx On KeyAutoTx On
Sent DTMF by pressing a DTMF
Keypad key
14 END END END
Display “END” indicating the end of
menu option