Specifications

RMU800A SERVICE MANUAL
－ 21 －
Note: In User Set Mode, turn the power off and back on to enter the Conventional Mode.
4. Firmware Download Mode
The built-in FLASHROM enables user to add new functions simply by upgrading.
(1) Turn on the power while holding down [PF4] simultaneously to enter Firmware Download Mode,
“PC Program” appears on the LCD.
(2) Run the programming software.
(3) Connect the radio with a PC by programming cable.
(4) Select the corresponding COM port, then click “Download”.
(5) When data is successfully written into the radio, click “OK” to exit.
(6) Repeat step 1-5 to program another radio.
Note: The radio can’t enter the Firmware Download Mode if it is prohibited by your dealer.
It can be set ON only after being programmed through the programming software or by your dealer.
Horn Alert
27
PF6Horn Alert Horn alert
LCD BackLight
28
PF6 LCD Light LCD backlight
Scramble
29
PF6 Scramble Scrambler
Compander
30
PF6 Compande
Compander
AUX A
31
PF6 AUX A
AUXA port output control
AUX B
32
PF6 AUX B
AUXB port output control
Send GPS
33
PF6 Send GPS
Send GPS
Emergency Call
34
PF6Emergency
Emergency call
6 [PF6]
Message
35
PF6 Message
Message
Volume Knob [Default]
Volume Knob
Volume knob
Channel Knob
Channel Knob
Channel selector knob
7
[SELECTOR
KNOB]
Zone Knob
Zone Knob
Zone selector knob
Volume Up/Down Volume UpDn
Volume knob
Channel Up/Down [Default] Channel UpDn
Channel selector knob
8 [Up/Down]
Zone Up/Down Zone UpDn
Zone selector knob
9
END END END
Display “END” indicating the end
of menu option