Specifications

RMU800A SERVICE MANUAL
－ 126 －
2-2. Test Frequency Channel (MHz)
In this mode, the test channel frequency (center(C)、low(L)、high(H) frequency) can be modified through
the programming software.
Model
RX/TX 1 ( C ) 2 ( L ) 3 ( H ) 4 5 6 7 8
RX(MHz) 155.15 136.15 173.85 145.55 164.55 155.00 155.20 155.400
（V）
TX(MHz) 155.00 136.00 174.00 145.50 164.50 155.00 155.20 155.40
RX(MHz)
481.15 450.15
511.85
465.55
496.55
481.00 481.20 481.40
1
（U2）
TX(MHz)
481.00 450.00 512.00
465.50
496.50 481.00 481.20 481.40
RX(MHz)
375.15 350.15 399.85
362.55
387.55 375.00 375.20 375.40
2
（U5）
TX(MHz)
375.00 350.00 400.00
362.50
387.50 375.00 375.20 375.40
RX(MHz)
435.15 400.15 469.85
417.55
452.55 435.00 435.20 435.40
3
（U1）
TX(MHz)
435.00 400.00 470.00
417.50
452.50 435.00 435.20 435.40
RX(MHz) 465.15 440.15 489.85 452.55 477.55 465.00 465.20 465.404
（U4）
TX(MHz) 465.00 440.00 490.00 452.50 477.50 465.00 465.20 465.40
RX(MHz)
503.15 480.15 525.85
491.75
515.25 503.00 503.20 503.40
5
（U3）
TX(MHz)
503.00 480.00 526.00
491.70
515.20 503.00 503.20 503.40
RX(MHz)
425.15 400.15 449.85
412.55
437.55 425.00 425.20 425.40
6
（U6）
TX(MHz)
425.00 400.00 450.00
412.50
437.50 425.00 425.20 425.40
3. Panel Tuning Mode
The Transceiver is adjusted in this mode.
3-1 To Enter The Panel Tuning Mode.
Press the [PF3] key in the panel test mode.
The adjustment items, the frequency and signalling, other than the maximum deviation and sensitivity,
return to the values that were effective for the test frequency channel and test signalling channel before
entering the panel tuning mode.
No. Dealer Mode LCD Display
1 Frequency stability Frequency
2 TX power Tx Power
3 Max. frequency deviation Max.Deviate
4 CDCSS balance CDCSSBalance
5 CTCSS frequency deviation CTCSSDeviate
6 CDCSS frequency deviation CDCSSDeviate
7 DTMF frequency deviation CDCSS Deviate
8 MSK frequency deviation MSK Deviate
9 Single tone frequency deviation Tone Deviate
10 RX sensitivity Rx Sensitivi
11 Squelch open level OpenSQL
12 Squelch close level CloseSQL