User's Manual

68
KNG User’s Manual
Busy Channel Mode
Busy Ch Mode
Off
→
Indicate
ESC ▲ ▼ ENT
Scn Hold Time
Busy Ch Mode
TX TOT
ESC ▲ ▼ ENT
1. With 'Busy Ch Mode' highlighted, press the
'ENT' button.
2. Use the up/down buttons to highlight the
desired Busy Channel Operation.
Off = No Busy Channel indication.
Indicate = Indicator LED glows yellow when
the selected frequency is in use.
Lockout = Prevents transmitting when selected
frequency is in use.
Override = Lets the user override the Lockout
function and transmit while frequency is busy.
4. Press the 'ENT' button to set the selection.
5. Press the 'ESC' button to return to the Global Programming menu.
TX Time Out Timer
The TX Time Out Timer Limits the length of transmissions to the
programmed time.
Tx Timeout
255 Seconds
ESC ▲ ▼ ENT
Busy Ch Mode
TX TOT
Bklight Mode
ESC ▲ ▼ ENT
1. With 'TX TOT' highlighted, press the 'ENT'
button.
2. Use the up/down buttons to select the
desired transmission time Limit. (0 - 225
seconds. Zero seconds = No Time Out Time.)
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Global Programming menu.
Backlight Mode
Bklight Mode
Off
→
Keypress
ESC ▲ ▼ ENT
TX TOT
Bklight Mode
Bklight Dur
ESC ▲ ▼ ENT
1. With 'Bklight Mode' highlighted, press the
'ENT' button.
2. Use the up/down buttons to highlight the
desired Backlight setting.
Off = No Backlight.
Keypress = Display and keypad light whenever
the keypad is used.
Display Chan = Display and keypad light
whenever displayed information changes
Both = Display and keypad light whenever