User's Manual

67
RELM/BK Radio
Global Priority 2 Channel
Pri 2 Chan
→
Off
Main
ESC ▲ ▼ ENT
Pri 1 Zone
Tx on Pri 1
Pri 2 Chan
ESC ▲ ▼ ENT
1. With 'Pri 2 Chan' highlighted, press the
'ENT' button.
2. Use the up/down buttons to highlight the
desired Priority Channel.
Off = No Global Priority Channel.
Main = Global Priority 2 Channel follows
channel select knob.
Channel Label = Assign as Priority 2 Channel.
4. Press the 'ENT' button to set the selection.
5. Press the 'ESC' button to return to the
Global Programming menu.
Global Priority 2 Zone
Pri 2 Zone
ZONE 1
→
ZONE 2
ESC ▲ ▼ ENT
Pri 2 Chan
Pri 2 Zone
Scn Hold Time
ESC ▲ ▼ ENT
1. With 'Pri 2 Zone' highlighted, press the
'ENT' button.
2. Use the up/down buttons to highlight the
Zone of desired Global Priority Channel.
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Global Programming menu
Scan Hold Time
Scan Hold Time is also used as the Hold Time for programmed
talkback functions.
Set Hold Time
0.0 Seconds
ESC ▲ ▼ ENT
Pri 2 Zone
Scn Hold Time
Busy Ch Mode
ESC ▲ ▼ ENT
1. With 'Scn Hold Time' highlighted, press the
'ENT' button.
2. Use the up/down buttons to select the
desired Hold Time.(0.0 - 7.5)
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Global Programming menu