User's Manual

66
KNG User’s Manual
Global Priority 1 Channel
Pri 1 Channel
Off
→
Main
ESC ▲ ▼ ENT
Pri 1 Chan
Pri 1 Zone
Tx on Pri 1
ESC ▲ ▼ ENT
1. With 'Pri 1 Chan' highlighted, press the
ENT button.
2. Use the up/down buttons to highlight the
desired Priority Channel.
Off = No Global Priority Channel.
Main = Global Priority 1 Channel follows
channel select knob.
Channel Label = Assign as Priority 1 Channel.
4. Press the 'ENT' button to set the selection.
5. Press the 'ESC' button to return to the
Global Programming menu.
Global Priority 1 Zone
Pri 1 Zone
ZONE 1
→
ZONE 2
ESC ▲ ▼ ENT
Pri 1 Chan
Pri 1 Zone
Tx on Pri 1
ESC ▲ ▼ ENT
1. With 'Pri 1 Zone' highlighted, press the'ENT'
button.
2. Use the up/down buttons to highlight the
Zone of desired Global Priority Channel.
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Global Programming menu
Tx on Global Priority 1 Channel
If enabled, the radio transmits on the Global Priority 1 Channel when
PRI is turned on.
Tx on Pri 1
→
Off
On
ESC ▲ ▼ ENT
Pri 1 Chan
Pri 1 Zone
Tx on Pri 1
ESC ▲ ▼ ENT
1. With 'Tx on Pri 1' highlighted, press the
'ENT' button.
2. Use the up/down buttons to highlight the
desired setting.
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Global Programming menu.