User's Manual

64
KNG User’s Manual
Priority 2 Channel
Pri 2 Channel
→
Main
Channel 1
ESC ▲ ▼ ENT
Tx on Pri 1
Pri 2 Chan
ANI Mode
ESC ▲ ▼ ENT
1. With 'Pri 2 Chan' highlighted, press the
'ENT' button.
2. Use the up/down buttons to highlight the
desired Priority Channel.
Off = No Zone Priority Channel.
Main = Priority 2 Channel follows channel
select knob.
Channel Label = Assign as Priority 2 Channel.
4. Press the 'ENT' button to set the selection.
5. Press the 'ESC' button to return to the
Zone Programming menu.
Automatic Number Identification (ANI) Mode
ANI/DTMF Mode
→
Off
DTMF Only
ESC ▲ ▼ ENT
Tx on Pri 1
Pri 2 Chan
ANI Mode
ESC ▲ ▼ ENT
1. With 'ANI Mode' highlighted, press the
'ENT' button.
2. Use the up/down buttons to highlight the
desired setting.
Off = No ANI operation.
DTMF Only = Transmit DTMF Tones with
keypad.
ANI Only = Send DTMF ANI on PTT.
BOTH = Keypad Tones and manual ANI.
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Zone Programming menu.
Automatic Number Identification (ANI) ID
ANI ID
1234567
ESC CLR ENT
Pri 2 Chan
ANI Mode
ANI ID
ESC ▲ ▼ ENT
ESC CLR ENT
ANI ID
1. With 'ANI ID' highlighted, press the ENT
button.
2. Press the 'CLR' button to clear the ID.
3. Use the keypad to select the desired
numeric ID. (Up to seven digits.)
4. Press the 'ENT' button to save the ID.
5. Press the 'ESC' button to return to the
Zone Programming menu.