User's Manual

59
RELM/BK Radio
Transmit Code Guard
TX Guard
000.0
ESC CLR ENT
Bandwidth
Tx Guard
Tx NAC
ESC ▲ ▼ ENT
ESC CLR ENT
TX Guard
000.0
1. With 'Tx Guard' highlighted, press the 'ENT'
button.
2. Press the 'CLR' button to clear the
currently programmed tone.
3. To enter CTCSS tones use the keypad to
enter the tone in Hertz. (67.0 - 255 Hz) To enter
CDCSS tones press the # key then enter the
three digit code. (000 - 999)
4. Press the 'ENT' button to set the tone.
5. Press the 'ESC' button to return to the
Channel Programming menu.
Transmit Network Access Code
TX NAC
$293
ESC CLR ENT
Tx Guard
Tx NAC
Squelch Mode
ESC ▲ ▼ ENT
ESC CLR ENT
TX NAC
$
1. With 'Tx NAC' highlighted, press the 'ENT'
button to edit the Guard Tone.
2. Press the 'CLR' button to clear the
currently programmed NAC. (The NAC returns
to the Project 25 default NAC of 293)
3. Use the keypad to select the first digit.
4. Press the PR1 button to move to the next
character. NACs are programmed as three
digit hexadecimal numbers. (000 - FFF)
5. Press the 'ENT' button to set the NAC.
6. Press the 'ESC' button to return to the
Channel Programming menu.