User's Manual

56
KNG User’s Manual
Channel Label
Channel Label
Label
ESC PR1 CLR ENT
Chan Label
Rx Freq
Rx Mode
ESC ▲ ▼ ENT
ESC CLR ENT
Channel Label
1. With 'Chan Label' highlighted, press the
ENT button.
2. Press the 'CLR' button to clear the label.
2. Use the keypad to select the desired
character. (See Keypad Character Chart.)
3. Press the 'NXT' button to move to the next
character. Labels can contain up to thirteen
characters.
4. Press the 'ENT' button to save the label.
5. Press the 'ESC' button to return to the
Channel Programming menu.
Receive Frequency
RX Frequency
151.62500 MHz
ESC CLR ENT
Chan Label
Rx Freq
Rx Mode
ESC ▲ ▼ ENT
ESC CLR ENT
RX Frequency
000.00000 MHz
1. With 'Rx Freq' highlighted, press the 'ENT'
button.
2. Press the 'CLR' button to clear the current
frequency.
3. Use the keypad to select the desired
Receive Frequency.
4. Press the 'ENT' button to set the frequency.
5. Press the 'ESC' button to return to the
Channel Programming menu.
Receive Mode
RX Mode
→
Digital
Mixed
ESC ▲ ▼ ENT
Chan Label
Rx Freq
Rx Mode
ESC ▲ ▼ ENT
1. With 'Rx Mode' highlighted, press the 'ENT'
button.
2. Use the up/down buttons to highlight the
desired Receiver Mode. (Analog, Digital or
Mixed)
3. Press the 'ENT' button to set the mode.
4. Press the 'ESC' button to return to the
Channel Programming menu.