User's Manual

55
RELM/BK Radio
Keypad Programming
If enabled, channel, zone and global parameters can be programmed
using the radio's keypad. Individual parameters may be blocked from
programming access. Check with your RELM/BK Radio dealer or
communications officer for information on the programmed functions of
your radio.
Programming Channel Information
Chan Label
Rx Freq
Rx Mode
ESC ▲ ▼ ENT
Enter Password
000000
ESC CLR ENT
User TGIDs
User Tones
Keypad Prog
ESC ▲ ▼ ENT
Talkaround
Tx Power
Keypad Prog
ESC ▲ ▼ ENT
Channels
Zone Params
Global Params
ESC ▲ ▼ ENT
Select Zone
Zone #
Zone Label
ESC ▲ ▼ ENT
Select Chan
Chan #
Channel Label
ESC ▲ ▼ ENT
Ch 1
KNG - P25
171.58500 MHz
LIGT T/A MENU LCK
RXD SCN
To enter the Channel Programming mode:
1. Press the MENU button.
2. Use the up/down arrows to highlight 'Keypad Prog'.
3. Press 'ENT'.
4. Use the up/down arrows to highlight 'Keypad Prog'.
5. Press 'ENT'.
6. Use the keypad to enter the six digit
password.
7. Press 'ENT'.
8. Use the up/down arrows to highlight
'Channels'
9. Press 'ENT'
8. Use the up/down arrows to select the Zone of
the desired channel.
9. Press 'ENT'.
10. Use the up/down arrows to select the
desired channel.
11. Press 'ENT'.
12. Use the up/down arrows to select the func-
tion you wish to edit.
Programmable Channel functions include: Chan-
nel Label, Receive Frequency, Receive Mode,
Receiver Code Guard, Squelch Mode, Transmit
Frequency, Transmit Mode, Bandwidth, Trans-
mit Code Guard, Transmit NAC, Talkgroup ID,
Secure Mode selection, Encryption Key Lock and
Low Power Lock.