User's Manual

53
RELM/BK Radio
Programming User Selectable Network Access Codes
The KNG can be pre-programmed with up to 32, user selectable NACs.
NACS are selected with the programmed buttons. If enabled, the NACs
can be programmed via the radio's keypad.
To enter NAC List programming:
Enter Password
000000
ESC CLR ENT
Call List
User Tones
User NACs
ESC ▲ ▼ ENT
User NACs
NAC-01
NAC-02
ESC ▲ ▼ ENT
NAC 01
000
ESC PR1 CLR ENT
NAC 01
293
ESC PR1 CLR ENT
Ch 1
KNG - P25
171.58500 MHz
LIGT T/A MENU LCK
RXD SCN
Talkaround
Tx Power
Keypad Prog
ESC ▲ ▼ ENT
1. Press the Menu button.
2. Use the up/down buttons to highlight 'Keypad
Prog'.
3. Press the 'ENT' button.
4. Use the up/down buttons to highlight 'User
NACs'.
5. Press 'ENT'.
6. Use the keypad to enter the six digit
password.
7. Press 'ENT'.
8. Use the up/down buttons to highlight the
NAC you wish to edit.
9. Press the' ENT' Button.
10. Press the 'CLR' button to clear the currently
programmed NAC.
11. Use the keypad to select the first digit.
12. Press the 'NXT' button to move to the next
character. NACs are programmed as three digit
hexadecimal numbers. (000 - FFF)
13. Press the 'ENT' button to set the NAC.