User's Manual

RELM/BK Radio

Zone Scan List Add/Delete

A menu item can be programmed to add or remove Zones to the Zone

Scan List.

To add a zone to the Scan List:

Zone Scan

ZONE 1

ZONE 2

ESC ▲ ▼ +/-

Ch 1

KNG - P25

171.58500 MHz

LIGT T/A MENU LCK

RXD SCN

Talkaround

Tx Power

Zone Scn List

ESC ▲ ▼ ENT

Press the Menu button.1.

Use the up/down buttons to select 'Zone 2.

Scan List'.

Press the 'ENT' button.3.

Use the up/down buttons to select the 4.

zone to add or delete.

Press the +/- button to toggle the 5.

selection. Zones in the scan list will be

proceeded by a '+' symbol.

Hold the 'ESC' button to return to 6.

normal operation.

Vote Scan (KZA0581)

Channels in a multicast conventional systems can be added to the scan

list and designated as “voted” channels. When a signal is received on

a voted channel the radio checks all voted channels and selects the

channel with the best signal.

If enabled vote scanning takes place whenever the channel scan switch

in on.

NOTE: Channel voting occurs only with Channel Scan and is disabled

when Zone Scanning. Channels programmed as Vote channels are

treated as normal scan list channels during Zone Scan operation.