User's Manual

33
RELM/BK Radio
Use the up/down buttons to select High or Low.4.
Press the 'ENT' button to set the selection.5.
Hold the 'ESC' button to return to normal operation.6.
Zone Select (ZON)
The 512 channels available in the KNG can be divided into multiple
operating zones. Switching between zones is accomplished via
a programmed button or menu item. Optionally, zone labels or
numbers can be displayed on the LCD. (See Alphanumeric Label
Options.)
Channel Scan
Zone Select
PRI Scan
ESC ▲ ▼ ENT
TXD
Zone Select
Zone #
ZONE LABEL
ESC ▲ ▼ ENT
Button Operation
Press the programmed button. 1.
ZON
Use the up/down buttons to select the 2.
desired zone.
Press 'ENT' to set the zone.3.
Press the 'ESC' button to return to 4.
normal operation.
Menu Operation
Press the assigned Menu button.1.
Use the up/down buttons to select the 2.
desired zone.
Press 'ENT' to set the zone.3.
Hold the 'ESC' button to return to 4.
normal operation.
Scan Options
Channel Scan (SCAN)
Ch 1
KNG - P25
171.58500 MHz
LIGT T/A MENU LCK
Ch 1
KNG - P25
171.58500 MHz
LIGT T/A MENU LCK
RXD SCN
SCN
The display indicates scan operation by
flashing SCAN.
Scan operates only while the radio is not
transmitting. The radio checks for signals
on channels in the preset Scan List, as well
as the channel selected by the Channel
Selector knob.
When a signal is detected, scanning stops
and the message is received. The received
channel is shown in place of the selected channel.