User's Manual

32
KNG User’s Manual
Tx Digital (TXD)
Ch 1
KNG - P25
171.58500 MHz
LIGT T/A MENU LCK
TXD
Ch 1
KNG - P25
171.58500 MHz
LIGT T/A MENU LCK
TXA
When the TXD is on, channels programmed
for mixed-mode transmit will transmit in
digital mode. When off, mixed-mode
channels transmit in analog mode. When
transmitting in digital mode the display
shows 'D' behind the TX indicator. In analog
transmit 'A" will follow the indicator.
Toggle switch operation
On - Slide the programmed switch toward the front of the radio.
Off - Slide the switch up toward the channel select switch.
Button Operation
On - Press the programmed button.
TXD
Off - Press the button again. TXD
Menu Operation
Press the assigned Menu button.1.
Use the up/down buttons to select 'TX Digital'.2.
Press the 'ENT' button.3.
Use the up/down buttons to select 'Digital' or 'Analog'.4.
Press the 'ENT' button to set the selection.5.
Hold the 'ESC' button to return to normal operation.6.
Tx Power (LPW)
If Tx Power selection is enabled, transmit power can be switched
between the high power and the pre-programmed low power setting.
Toggle switch operation
High - Slide the programmed switch toward the front of the radio.
Low - Slide the switch up toward the channel select switch.
Button Operation
High - Press the programmed button.
LPW
Low - Press the button again. LPW
Menu Operation
Press the assigned Menu button.1.
Use the up/down buttons to select 'TX Power'.2.
Press the 'ENT' button.3.