User's Manual

14
KNG User’s Manual
15
RELM/BK Radio
Programmable Switch and Button Functions
The KNG portable radio is equipped with seven programmable control
buttons and three programmable switches. Switch and button functions
are assigned via PC programming.
Switch Options
Channel Scan Priority Scan Zone Scan
Backlight Talkaround Tx Power
Monitor Tx Digital Tx Secure
Buttons Options
Channel Scan Priority Scan Contrast
Zone Scan Menu Backlight
Tx Power Monitor Tx Digital
Tx Secure Unit Call Zeroize Keys
Rekey Request
Cloning
Picklist-CxCSS
Picklist-NAC Picklist-TGID Picklist-Key
Picklist-Ket Set Zone Select Squelch Adjust
PRI Channel
Select
Repeater
Talkaround
Surveillance
Mode
Version System Test Emergency
(Orange Only)
Menu Options
Channel Scan Priority Scan Contrast
Zone Scan Menu Backlight
Tx Power Monitor Tx Digital
Tx Secure Unit Call Zeroize Keys
Rekey Request
Cloning
Picklist-CxCSS
Picklist-NAC Picklist-TGID Picklist-Key
Picklist-Ket Set Zone Select Squelch Adjust
PRI Channel
Select
Repeater
Talkaround
Surveillance
Mode
Version System Test Channel Scan
List
Zone Scan List
KNG
BK RADIO
15
1
2
3
4
5
6
7
8
9
11
10
12
13
14
16
SCAN
PRI
VOL
Right Toggle
Collar Switch
Left Toggle
Orange Button
Square
Diamond
Up
Down
Side Buttons
15
1
2
3
4
5
6
7
8
9
11
10
12
13
14
16
On
Off
On Off
BKLT T/A MENU TXD
Functions assigned to the diamond, square or up/
down buttons will be highlighted on the display when turned on.
NOTE: Functions programmed to the toggle or collar switches should not
be programmed as menu items or button functions.
Keypad Menu Operation
One button can be programmed as 'Menu'. Items shown in the previous
table can be programmed and arranged via PC programming. These
items can then be accessed with the 'Menu' button.
To select from the menu:
Mixed Mode Tx

Analog
Digital
ESC ▲ ▼ ENTER
Channel Scan
Tx Digital
PRI Scan
ESC ▲ ▼ ENTER
TXDN
2
1
3
1. Press the programmed "Menu" button.
2. Scroll to the desired menu item using the
up/down buttons or use the number keys to
select the number of the desired function.
3. Press the square button marked 'ENTER'
to open the selected item.
4. Use the up/down buttons to highlight the
desired operation.
5. Press the square button marked 'ENTER'
to set the selection.
6. Press and hold the diamond button
marked 'ESC' to return to normal radio
operation.