User's Manual

60
KNG User’s Manual
61
RELM/BK Radio
Global Priority 1 Channel

Priority 1 Zone
Zone 1
Zone 2
Zone 3
ESC ▲ ▼ ENTER
3
2
1

Priority 1 Channel
Off
Main
Select> Zn:01 Ch:01
ESC ▲ ▼ ENTER

Priority 1 Channel
Channel 1
Channel 2
Channel 3
ESC ▲ ▼ ENTER
3
2
1
Select 'Priority 1 Channel' from the menu.1.
Use the up/down buttons to highlight the 2.
desired Priority Channel.
Off = No Zone Priority Channel.
Main = Priority 1 Channel follows channel
select knob.
Select= Use the up/down buttons to select
the zone and channel or select the zone or
channel directly using the keypad.
Press the 'ENTER' button to set the 3.
selection and return to the programming list.
Tx on Global Priority 1 Channel
If enabled, the radio transmits on the Global Priority 1 Channel when
PRI is turned on.

Transmit on Priority 1
On
Off
ESC ▲ ▼ ENTER
Select 'Priority 1 Channel' from the menu.1.
Use the up/down buttons to highlight the 2.
desired setting.
Press the 'ENTER' button to set the 3.
selection and return to the programming list.
Global Priority 1 Channel

Priority 1 Zone
Zone 1
Zone 2
Zone 3
ESC ▲ ▼ ENTER
3
2
1

Priority 1 Channel
Off
Main
Select> Zn:01 Ch:01
ESC ▲ ▼ ENTER

Priority 1 Channel
Channel 1
Channel 2
Channel 3
ESC ▲ ▼ ENTER
3
2
1
Select 'Priority 1 Channel' from the menu.1.
Use the up/down buttons to highlight the 2.
desired Priority Channel.
Off = No Zone Priority Channel.
Main = Priority 1 Channel follows channel
select knob.
Select= Use the up/down buttons to select
the zone and channel or select the zone or
channel directly using the keypad.
Press the 'ENTER' button to set the 3.
selection and return to the programming list.
Scan Hold Time
Scan Hold Time is also used as the Hold Time for programmed
talkback functions.
Scan Hold Time
2.5 Sec
ESC ▲ ▼ ENTER
Select 'Scan Hold Time' from the menu.1.
Use the up/down buttons to select the 2.
desired Hold Time.(0.0 - 7.5)
Press the 'ENTER' button to set the 3.
selection and return to the programming list.
Busy Channel Mode

Busy Channel Mode
Indicate
Locked
Override
ESC ▲ ▼ ENTER
Select 'Busy Channel Mode' from the menu.1.
Use the up/down buttons to highlight the 2.
desired Busy Channel Operation.
Off = No Busy Channel indication.
Indicate = Indicator LED glows yellow when
the selected frequency is in use.
Lockout = Prevents transmitting when selected
frequency is in use.
Override = Lets the user override the Lockout
function and transmit while frequency is busy.
Press the 'ENTER' button to set the 3.
selection and return to the programming list..
TX Time Out Timer
The TX Time Out Timer Limits the length of transmissions to the
programmed time.
Scan Hold Time
60 Sec
ESC ▲ ▼ ENTER
Select 'Tx Timeout' from the menu.1.
Use the up/down buttons to select the 2.
desired Hold Time.(0 - 225)
Press the 'ENTER' button to set the 3.
selection and return to the programming list.