User's Manual

58
KNG User’s Manual
59
RELM/BK Radio
Automatic Number Identifi cation (ANI/DTMF) Mode

Priority 1 Channel
Channel 1
Channel 2
Channel 3
ESC ▲ ▼ ENTER
3
2
1

ANI/DTMF Mode
Off
DTMF Only
ANI Only
ESC ▲ ▼ ENTER
3
2
1
Select 'Scan List Lock' from the menu.1.
Use the up/down buttons to highlight the 2.
desired setting.
Off = No ANI operation.
DTMF Only = Transmit DTMF Tones with
keypad.
ANI Only = Send DTMF ANI on PTT.
DTMF with Manual ANI = Keypad Tones and
manual ANI.
Press the 'ENTER' button to set the 3.
selection and return to the programming list.
Automatic Number Identifi cation (ANI) ID
TGID
232
ESC CLEAR EDIT
TGID
232
ESC BACK NEXT ENTER
Select 'ANI ID' from the menu.1.
Press the 'CLEAR' button to clear the 2.
currently programmed ID or press the or 'EDIT'
button to edit the ID.
Use the keypad to enter the ANI ID.3.
(Up to seven digits)
Press the 'ENTER' button to set the ID and 4.
return to the programming menu.
Disable Inbound Cloning
If enabled, the Zone will not accept incoming clone from another radio.
If cloning is blocked in any zone, the radio will not accept a full radio
clone.

Disable Inbound Clone
Disabled
Enabled
ESC ▲ ▼ ENTER
Select 'Disable Incoming Clone' from the 1.
menu.
Use the up/down buttons to highlight the 2.
desired setting.
Press the 'ENTER' button to set the 3.
selection and return to the programming list.
Programming Global Information
Keypad
Channel
Call List
2
1
3
ESC ▲ ▼ ENTER
Talkaround
Tx Power
Keyboard Program
ESC ▲ ▼ ENTER
2
1
3
Edit Password
|
ESC BACK ENTER
Global
Zone
Channel
ESC ▲ ▼ ENTER
2
1
3
Select 'Keypad Programming' from the 1.
programmed menu.
Enter the User or Administrator Password.2.
Use the up/down buttons to select 3.
'Keypad'.
Use the up/down buttons to select 'Global'.4.
Use the up/down arrows to select the 5.
function you wish to edit.
Programmable Global functions include:
Priority 1 Channel, Priority 1 Zone, Transmit on
Priority 1 Channel, Priority 2 Channel, Priority
2 Zone, Scan Hold Time, Busy Channel Mode,
Transmit Time-out-Timer, Backlight Mode,
Backlight Duration, Battery Saver, and User
Password.
Programmable functions can be selected from the list using the up/down
arrows. Alternatively, programmable functions may be selected by using
the number buttons to enter the number associated with the desired
function.
Programmable Channel Parameter Numbers:
Priority 1 Channel1.
Transmit on Priority 1 Channel2.
Priority 2 Channel3.
Scan Hold Time4.
Busy Channel Mode5.
Tx Timeout Timer6.
Backlight Mode7.
Backlight duration8.
Battery Saver9.
Edit Password10.