User's Manual

56
KNG User’s Manual
57
RELM/BK Radio
Programmable functions can be selected from the list using the up/down
arrows. Alternatively, programmable functions may be selected by using
the number buttons to enter the number associated with the desired
function.
Programmable Zone Parameter Numbers:
Zone Label1.
Priority 1 Channel2.
Transmit on Priority 13.
Priority 2 Channel4.
Scan List Lock5.
ANI/DTMF Mode6.
ANI ID7.
Disable Incoming Clone8.
Zone Label
ESC CLEAR EDIT
Zone Label
Label 1
ESC BACK NEXT ENTER
Zone Label
Label 1
1. Select 'Zone Label' from the menu.
2. Press the 'CLR' or 'EDIT' button to program
the label.
2. Use the keypad to select the desired
character. (See Keypad Character Chart.)
3. Press the 'NXT' button to move to the next
character. Labels can contain up to thirteen
characters.
4. Press the 'ENTER' button to set the label
and return to the programming list.
Priority 1 Channel
NOTE: If Global Priority is enabled, Zone priority is disabled.

Priority 1 Channel
Channel 1
Channel 2
Channel 3
ESC ▲ ▼ ENTER
3
2
1

Priority 1 Channel
Off
Main
Select
ESC ▲ ▼ ENTER
3
2
1
Select a Priority Channel
Select 'Priority 1 Channel' from the menu.1.
Use the up/down buttons to highlight the 2.
desired Priority Channel.
Off = No Zone Priority Channel.
Main = Priority 1 Channel follows channel
select knob.
Select= Assign a Priority 1 Channel.
Press the 'ENTER' button to set the 3.
selection and return to the programming list.
Transmit on Priority 1 Channel
If enabled, the radio transmits on the Priority 1 Channel when PRI is
turned on.

Transmit on Priority 1
Off
On
ESC ▲ ▼ ENTER
Select 'Transmit on Priority 1' from the 1.
menu.
Use the up/down buttons to highlight the 2.
desired setting.
Press the 'ENTER' button to set the 3.
selection and return to the programming list.
Priority 2 Channel
NOTE: If Global Priority is enabled, Zone priority is disabled.

Priority 2 Channel
Channel 1
Channel 2
Channel 3
ESC ▲ ▼ ENTER
3
2
1

Priority 2 Channel
Off
Main
Select
ESC ▲ ▼ ENTER
3
2
1
Select a Priority Channel
Select 'Priority 2 Channel' from the menu.1.
Use the up/down buttons to highlight the 2.
desired Priority Channel.
Off = No Zone Priority Channel.
Main = Priority 2 Channel follows channel
select knob.
Select= Assign a Priority 2 Channel.
Press the 'ENTER' button to set the 3.
selection and return to the programming list.
Scan List Lock

Scan List Lockout
Off
On
ESC ▲ ▼ ENTER
Select 'Scan List Lock' from the menu.1.
Use the up/down buttons to highlight the 2.
desired setting.
Press the 'ENTER' button to set the 3.
selection and return to the programming list.