User's Manual

52
KNG User’s Manual
53
RELM/BK Radio
Select - Picklist Selected Tone
Picklist Entry
22
ESC CLEAR EDIT
Picklist Entry
22
ESC BACK NEXT ENTER
Select 'Select' from the menu.1.
Press the 'CLEAR' button to clear the 2.
currently programmed tone or press the or
'EDIT' button to edit the tone.
Use the keypad to enter the Picklist Tone 3.
number. (1-32)
Press the 'ENTER' button to set the tone 4.
and return to the programming menu.
Transmit Network Access Code

Tx NAC
Enter-> $123
Select-> UNAC32
ESC ▲ ▼ ENTER
NOTE: Network Access Codes are available
only on channels programmed for digital or
mixed mode operation.
Select 'Tx NAC' from the menu.1.
The arrow indicates the currently programmed
or selected NAC.
Use the up/down buttons to select the 2.
desired Code Guard type.
Enter=Program TX NAC to channel
Select=NAC selected from User NAC list.
Use the keypad to program the desired 3.
Setting. (See below)
Enter - Program NAC
Tx NAC
22E
ESC CLEAR EDIT
Tx NAC
22E
ESC BACK NEXT ENTER
Select 'Enter' from the menu.1.
Press the 'CLEAR' button to clear the 2.
currently programmed NAC or press the or
'EDIT' button to edit the NAC.
Use the keypad to select the fi rst digit.3.
Press the 'NXT' button to move to the next 4.
character.
NACs are programmed as three digit
hexadecimal numbers. (000 - FFF)
Press the 'ENTER' button to set the tone 5.
and return to the programming menu.
NOTE: F7E and F7F are reserved for receive only.
Select - Picklist Selected Tone
Picklist Entry
22
ESC CLEAR EDIT
Picklist Entry
22
ESC BACK NEXT ENTER
Select 'Select' from the menu.1.
Press the 'CLEAR' button to clear the 2.
currently programmed tone or press the or
'EDIT' button to edit the tone.
Use the keypad to enter the Picklist Tone 3.
number. (1-32)
Press the 'ENTER' button to set the tone 4.
and return to the programming menu.
Talk Group ID

Tx TGID
Enter-> 232
Select-> UNTG32
ESC ▲ ▼ ENTER
NOTE: Talk groups are available only on
channels programmed for digital or mixed
mode operation.
Select 'Tx TGID' from the menu.1.
The arrow indicates the currently programmed
or selected TGID.
Use the up/down buttons to select the 2.
desired Code Guard type.
Enter=Program TX TGID to channel
Select=TGID selected from User TGID list.
Use the keypad to program the desired 3.
Setting. (See below)
Enter - Program TGID
TGID
232
ESC CLEAR EDIT
TGID
232
ESC BACK NEXT ENTER
Select 'Enter' from the menu.1.
Press the 'CLEAR' button to clear the 2.
currently programmed TGID or press the or
'EDIT' button to edit the TGID.
Use the keypad to enter the fi rst TGID.3.
(1-65535 - FFF)
Press the 'ENTER' button to set the tone 4.
and return to the programming menu.