User's Manual

46
KNG User’s Manual
47
RELM/BK Radio
Keypad Programming
If enabled, channel, zone and global parameters can be programmed
using the radio's keypad. Individual parameters may be blocked from
programming access. Check with your RELM/BK Radio dealer or
communications offi cer for information on the programmed functions of
your radio.
Programming Channel Information
Keypad
User NACs
Call List
2
1
3
ESC ▲ ▼ ENTER
Talkaround
Tx Power
Keyboard Program
ESC ▲ ▼ ENTER
2
1
3
Edit Password
|
ESC BACK ENTER
Global
Zone
Channel
ESC ▲ ▼ ENTER
2
1
3

Zone Select
ZONE 1
ZONE 2
ZONE 3
ESC ▲ ▼ ENTER
3
2
1

Channel Select
Channel 1
Channel 2
Channel 3
ESC ▲ ▼ ENTER
3
2
1
Select 'Keypad Programming' from the 1.
programmed menu.
Enter the User or Administrator 2.
Password.
Use the up/down buttons to select 3.
'Keypad'.
Use the up/down buttons to select 4.
'Channel'.
Use the up/down buttons to select the 5.
zone of the channel you wish to edit or select
the zone directly using the keypad.
Use the up/down buttons to select the 6.
channel you wish to edit or select the channel
directly using the keypad.
Press 'ENTER' to program the channel.7.
Use the up/down arrows to select the 8.
function you wish to edit.
Programmable Channel functions include:
Channel Label, Receive Frequency, Receive
Mode, Receiver Code Guard, Squelch Mode,
Transmit Frequency, Transmit Mode, Band-
width, Transmit Code Guard, Transmit NAC,
Talkgroup ID, Secure Mode selection, Encryp-
tion Key Lock and Low Power Lock.
Programmable functions can be selected from the list using the up/down
arrows. Alternatively, programmable functions may be selected by using
the number buttons to enter the number associated with the desired
function.
Programmable Channel Parameter Numbers:
Channel Label1.
Rx Frequency2.
Rx Mode3.
Rx Guard4.
Rx NAC5.
Squelch Mode6.
Bandwidth7.
Low Power Lock8.
Tx Frequency9.
Tx Mode10.
Tx Guard11.
Tx NAC12.
Tx TGID13.
Key14.
Secure Mode15.
Key Lock16.
Channel Label
ESC CLEAR EDIT
Channel Label
Label 1
ESC BACK NEXT ENTER
Channel Label
Label 1
1. Select 'Channel Label' from the menu.
2. Press the 'CLR' or 'EDIT' button to program
the label.
2. Use the keypad to select the desired
character. (See Keypad Character Chart.)
3. Press the 'NXT' button to move to the next
character. Labels can contain up to thirteen
characters.
4. Press the 'ENTER' button to set the label
and return to the programming list.
Receive Frequency
ESC CLEAR EDIT
Rx Frequency
151.625000
Rx Frequency
000.000000
ESC BACK NEXT ENTER
1. Select Rx Frequency' from the menu.
2. Press the 'CLR' or 'EDIT' button to program
the frequency.
2. Use the keypad to select the desired
frequency. (136 - 174 MHz)
3. Press the 'ENTER' button to set the
frequency and return to the programming list.