User's Manual

44
KNG User’s Manual
45
RELM/BK Radio
Programming User Selectable Network Access Codes
The KNG can be pre-programmed with up to 32, user selectable NACs.
NACS are selected with the programmed buttons. If enabled, the NACs
can be programmed via the radio's keypad.
To enter NAC List programming:
Talkaround
Tx Power
Keyboard Program
ESC ▲ ▼ ENTER
2
1
3
Edit Password
|
ESC BACK ENTER
Keypad
User NACs
Call List
2
1
3
ESC ▲ ▼ ENTER
User NACs
NAC-01 $A2E
NAC-02 $123
NAC-06 $F2F
ESC ▲ ▼ ENTER
Enter NAC
A2E
ESC CLEAR EDIT
Enter NAC
A2E
ESC BACK NEXT ENTER
Select 'Keypad Programming' from the 1.
programmed menu.
Enter the User or Administrator 2.
Password.
Use the up/down buttons to select 'User 3.
NACs'.
Use the up/down buttons to highlight 4.
the NAC you wish to edit or select the NAC
number diredtly by using the keypad.
Press the' ENTER' button edit the NAC.5.
Press the 'CLEAR' button to clear the 6.
currently programmed NAC or press the or
'EDIT' button to edit the NAC.
Use the keypad to select the fi rst digit.7.
Press the 'NXT' button to move to the
next character. NACs are programmed
as three digit hexadecimal numbers.
(000 - FFF)
Press the 'ENTER' button to set the 8.
tone and return to the selectable tones list.
Hold 'ESC' to return to normal operation.9.
Programming User Selectable Talkgroup IDs
The KNG can be pre-programmed with up to 32, user selectable TGIDs.
TDIDs are selected with the programmed buttons. If enabled, the TGIDs
can be programmed via the radio's keypad.
To enter TGID List programming:
Talkaround
Tx Power
Keyboard Program
ESC ▲ ▼ ENTER
2
1
3
Edit Password
|
ESC BACK ENTER
Keypad
User TGIDs
Call List
2
1
3
ESC ▲ ▼ ENTER
User NACs
NAC-01 $A2E
NAC-02 $123
NAC-06 $F2F
ESC ▲ ▼ ENTER
Enter NAC
A2E
ESC CLEAR EDIT
Enter NAC
A2E
ESC BACK NEXT ENTER
Select 'Keypad Programming' from the 1.
programmed menu.
Enter the User or Administrator 2.
Password.
Use the up/down buttons to select 'User 3.
TGIDs'.
Use the up/down buttons to highlight 4.
the TGID you wish to edit or select the TGID
number directly using the keypad.
Press the' ENTER' button edit the TGID.5.
Press the 'CLEAR' button to clear the 6.
currently programmed TGID or press the or
'EDIT' button to edit the TGID.
Use the keypad to program the new 7.
TGID. (1 - 65535)
Press the 'ENTER' button to set the 8.
tone and return to the selectable TGID list.
Hold 'ESC' to return to normal operation.9.