User's Manual

40
KNG User’s Manual
41
RELM/BK Radio
Keypad Programming Options
If enabled via PC programming, the radio's Picklists and Individual Call
List information can be edited using the keypad. In addition, programmed
channel, zone and some global settings can also be programmed. Check
with your RELM/ BK Radio dealer or c ommunic ations of fi cer for information
on the programmed functions of your radio.
Programmable categories include Individual P25 ID Quick Call/Receive
List, User Tone List, User NAC List, User Talk Group ID List and Keypad
Programming of Channel, Zone and Global radio parameters.
Programming P25 ID Unit Call/Receive List
The KNG can be pre-programmed with up to 100 Project 25 IDs and labels.
If 'RX'd Unit ID' is designated as a display line, the P25 ID of the radio
sending the call will be shown when receiving a digital signal. If the P25 ID
of the received call is programmed in the Call List, the alphanumeric label
associated with the ID will be displayed. If the P25 ID is not in the Call List,
the numeric P25 ID will be displayed.
To enter P25 Call List programming:
Talkaround
Tx Power
Keyboard Program
ESC ▲ ▼ ENTER
2
1
3
Edit Password
|
ESC BACK ENTER
Keypad
User Tones
Call List
2
1
3
ESC ▲ ▼ ENTER
Call List
Call 1
Call 2
Call 3
ESC ▲ ▼ ENTER
3
2
1
Select 'Keypad Programming' from the 1.
programmed menu.
Enter the User or Administrator 2.
Password.
Use the up/down buttons to select 'Call 3.
List'.
Use the up/down buttons to highlight the 4.
P25 ID you wish to edit or select the ID using
the numeric keypad.
Press ENTER to display the 5.
alphanumeric label and P25 ID of the
selected ID.
Editing the label
Edit Label
Call 1
ESC CLEAR EDIT
Edit Call
Label -> Call 1
Dest ID -> 123456
ESC ▲ ▼ ENTER
Edit Label
|
ESC BACK NEXT ENTER
Use the down arrow button to highlight 1.
the label.
Press the ENTER edit the label.2.
Press 'CLEAR' or 'EDIT'. Use the 3.
keypad to select the desired character. (See
Keypad Character Chart.)
Press the PR1 button to move to the 4.
next character. Labels can contain up to
thirteen characters.
Press the ENTER button to save the 5.
label or ESC to abort the process.
Editing the ID Number
Edit Call
Label -> Call 1
Dest ID -> 123456
ESC ▲ ▼ ENTER
Edit Call ID
123456
ESC CLEAR EDIT ENTER
Edit Call ID
|
ESC BACK NEXT ENTER
Use the down arrow button to highlight 1.
the ID.
Press the ENTER edit the ID.2.
Use the keypad to select the desired ID 3.
number. (Up to seven digits.)
Press the ENTER button to save the ID 4.
or ESC to abort the process.