User's Manual

38
KNG User’s Manual
39
RELM/BK Radio
Picklist – TGID (UTG)
Selecting a Talk Group ID from the Pick List will assign the TGID to
the currently select channel. All other channels are unaffected.
Operation:
Ch 1
KNG - P25
T:03 N: 22 TG: 03
TXD T/A MENU ZON
RXD SCN
User Tones
Default
Select-> NAC-32
ESC ▲ ▼ ENTER
User TGIDs
Default
Select->
ESC ▲ ▼ ENTER
User TGIDs
TGID - 01 1234
TGID - 02 5466
TGID - 03 3456
ESC ▲ ▼ ENTER
Press the button programmed for 'UTG' 1.
or select 'User TGIDs' form the programmed
menu.
Use the up/down buttons to select 2.
'Default' or 'Select'.
Default - Uses the TGID programmed to the
specifi ed channel.
Select - Use the up/down buttons to select
the desired TGID (1-32) or select the TGID
using the numeric keypad.
Press the 'ENTER' button to set the 3.
selection and return.
Hold the 'ESC' button to return to 4.
normal operation.
NOTE: When entering the pick list screen,
'Select' will be highlighted and the current
TGID displayed if the channel is currently
programmed for a selected TGID.
One line of the display may be programmed
to show selected picklist items. If a TGID
other than the default to is selected the
programmed line will display TG:xx, where
'xx' represents the selected TGID.
Picklist – Key (UKEY)
Selecting an Encryption Key from the Pick List will assign the Key
to all encrypted channels that do not have 'Key Lock' programmed.
Locked key channels will continue to use the pre-programmed key.
Operation:
User Tones
Default
Select-> UKEY 32
ESC ▲ ▼ ENTER
User Keys
Default
Select->
ESC ▲ ▼ ENTER

Call List
Key 1
Key 2
Key 3
ESC ▲ ▼ ENTER
3
2
1
Press the button programmed for 1.
'UKEY' or select 'User Keys' form the
programmed menu.
Use the up/down buttons to select 2.
'Default' or 'Select'.
Default - Uses the Key programmed to the
specifi ed channel.
Select - Use the up/down buttons to select the
desired Key (1-32) or select the Key using the
numeric keypad.
Press the 'ENTER' button to set the 3.
selection and return.
Hold the 'ESC' button to return to 4.
normal operation.
NOTE: When entering the pick list screen,
'Select' will be highlighted and the current
selected key displayed if the channel is
currently programmed for a selected key.