User's Manual

34
KNG User’s Manual
35
RELM/BK Radio
Receiving a Unit Call
Calling
Call 3
MON T/A MENU SCN
RXD

Unit Call

Last Call Radio 1
Call List
Enter ID
ESC ▲ ▼ ENTER
When an incoming Unit Call is received, an
alert tone will sound and the display will show
the incoming P25ID. If the P25 in use matches
a programmed ID in the Call List, the label
associated with the ID will be displayed. (See
Call List Programming)
The telephone icon fl ashes to indicate an
incoming Unit Call. After the reception the icon
will continue to fl ash to indicate a missed Unit
Call.
To view the caller ID press the button
programmed for 'U2U' or select 'Unit Call' form
the programmed menu. The P25 ID number or
label will be displayed next to "Last Call".
To clear the phone icon cycle radio power.
Unit-to Unit Callback
If enabled, pressing PTT during the hold time results in a Unit-to-Unit
call to the received unit ID.
Call List Programming
If enabled with the PC radio editor, the P25 Call List can edited via the
radio's keypad programming function. (See Keypad Programming)
Encryption Options
Tx Secure (TXS)
When SEC is on, encrypted channels programmed for switchable
encryption will transmit an encrypted signal.
NOTE: The SEC switch has no effect on channels programmed as
Encrypted or Clear Only channels.
Toggle switch operation
On - Slide the programmed switch toward the front of the radio.
Off - Slide the switch up toward the channel select switch.
Button Operation
On - Press the programmed button.
TXS
Off - Press the button again. TXS
Menu Operation
Secure Tx
Clear
Secure
ESC ▲ ▼ ENTER
Channel Scan
TX Secure
PRI Scan
ESC ▲ ▼ ENTER
2
1
3
Press the assigned Menu button.1.
Use the up/down buttons to select 'TX 2.
Secure'.
Press the 'ENTER' button.3.
Use the up/down buttons to select 4.
Secure or Clear.
Press the 'ENTER' button to set the 5.
selection.
Hold the 'ESC' button to return to 6.
normal operation.
Zeroize Keys (ZER)
The radio provides a method for the user to zeroize all encryption
keys. This service also sets all touchpad passwords to ‘FFFFFF’.
The Zeroize Keys function can be assigned to a button or the radio
menu.
To initiate the Zeroize Function:
Zeroize Keys
Zeroize Now?
CANCEL OK
Press the button programmed for "ZER" 1.
or select 'Zeroize Keys' form the programmed
menu.
Press the 'OK' button to erase the 2.
Encryption Keys, or press 'CANCEL' to cancel
the operation.
Wait for the radio to start beeping and for the ‘ZERO ALL’ message to
appear on the LCD.
The radio will stop beeping and the ‘ZEROIZED’ message will appear
on the LCD after all keys are destroyed.