User's Manual

30
KNG User’s Manual
31
RELM/BK Radio
To select a new Global Priority Channel:
Global Pr1 Channel

Off
Main
Select- > Zn:1 Ch:1
ESC ▲ ▼ ENTER
Global Pr1 Chan
Global Pr2 Chan
Zone 1 Pr1 Chan
ESC ▲ ▼ ENTER
2
1
3

Pri 1 Zone
ZONE 1
ZONE 2
ZONE 3
ESC ▲ ▼ ENTER
3
2
1

Select Channel
Channel 1
Channel 2
Channel 3
ESC ▲ ▼ ENTER
3
2
1
Press the button programmed for 1.
"PRI" or select 'Priority Channels' form the
programmed menu.
Use the up/down buttons to select the 2.
priority channel you wish to edit.
'Glob PR1 Channel'
'Glob PR2 Channel'
The arrow indicates the current setting. 3.
Use the up/down buttons to select 'Off',
'Main' to use the knob selected channel as
the priority channel or 'Select' to assign a
new channel.
If 'Select' is chosen you will be prompted to
select the zone and channel of the desired
Global Priority channel.
Hold the 'ESC' button to return to 4.
normal radio operation
Scan List Add/Delete
A menu item can be programmed to add or remove channels from the
scan list. Channels currently in the scan list will show 'SCN' in the top
line of the display.
To edit the Scan List:
Chan Scan List
Channel 1
Channel 2
Channel 3
ESC ▲ ▼ ENTER
3
3
Select 'Scan List' from the programmed 1.
menu.
Use the up/down buttons to select the 2.
desired channel.
Toggle the 'ENTER' button to add or 3.
delete the channel from the Scan List.
Channels preceded by '3' are currently in the scan list
Hold 'ESC' to return to normal radio operation.4.
Zone Scan (ZSCN)
Ch 1
KNG - P25
171.58500 MHz
MON T/A MENU TXD
Ch 1
KNG - P25
171.58500 MHz
MON T/A MENU TXD
RXDN SCAN
SCAN
When Zone Scan is turned on, the radio scans
all programmed scan channels in zones
programmed as Zone Scan zones.
Toggle switch operation
On - Slide the programmed switch toward the
front of the radio.
Off - Slide the switch up toward the channel
select switch.
Button Operation
On - Press the programmed button.
ZSCN
Off - Press the button again. ZSCN
Menu Operation
Press the assigned Menu button.1.
Use the up/down buttons to select 'Zone Scan'.2.
Press the 'ENTER' button.3.
Use the up/down buttons to select On or Off.4.
Press the 'ENTER' button to set the selection.5.
Hold the 'ESC' button to return to normal operation.6.
Zone Scan List Add/Delete
A menu item can be programmed to add or remove Zones to the Zone
Scan List.
To edit the Zone Scan List:
Zone Scan List
ZONE 1
ZONE 2
ZONE 3
ESC ▲ ▼ ENTER
3
3
Select 'Scan List' from the programmed 1.
menu.
Use the up/down buttons to select the 2.
desired zone.
Toggle the 'ENTER' button to add or delete 3.
the zone from the Scan List.
Zones preceded by '3' are currently lin the
scan list
Hold 'ESC' to return to normal radio 4.
operation.