User's Manual

24
KNG User’s Manual
25
RELM/BK Radio
Button Operation;
On - Press the programmed button.
T/A
Off - Press the button again. T/A
Menu Operation:
Select 'Talk Around' from the programmed menu1.
Use the up/down buttons to select 'Repeater' or 'Direct'.2.
Press the 'ENTER' button to set the selection.3.
Hold the 'ESC' button to return to normal operation.4.
Surveillance Mode (SLNT)
When SLNT is on, all audible indicators (button beeps etc.) and LEDs
are disabled.
NOTE: If the Backlight option is enabled, keypad and display lights
can still be switched on and off.
Operation:
Press the button programmed for Surveillance or select 1.
'Surveillance Mode' form the programmed menu.
Use the up/down buttons to select "On" or "Off".2.
Press the 'ENTER' button to set the selection and return to 3.
normal operation or press the 'ESC' to abort.
Squelch Adjust (SQL)
Squelch adjust can be assigned to the keypad or a radio menu item.
Press the button programmed for Squelch Adjust or select 1.
'Squelch Adjust' form the programmed menu.
Use the up/down arrows to select the desired squelch point.2.
Press 'ENTER' to set the selection. 3.
Hold the 'ESC' button to return to normal operation.4.
Test System (TEST)
The Test System functions are used for radio service only. These
functions should only be accessed by qualifi ed technical personnel.
Refer to the radio's service manual for information and operation of
the Test System function.
Tx Digital (TXD)
Ch 1
KNG - P25
171.58500 MHz
MON T/A MENU TXD
TXD
Ch 1
KNG - P25
171.58500 MHz
MON T/A MENU TXD
TXA
When the TXD is on, channels programmed
for mixed-mode transmit will transmit in digital
mode. When off, mixed-mode channels
transmit in analog mode. When transmitting
in digital mode the display shows 'D' behind
the TX indicator. In analog transmit 'A" will
follow the indicator.
Toggle switch operation:
On - Slide the programmed switch toward the front of the radio.
Off - Slide the switch up toward the channel select switch.
Button Operation:
On - Press the programmed button.
TXD
Off - Press the button again. TXD
Menu Operation:
Select 'TX Digital' form the programmed menu.1.
Use the up/down buttons to select 'Digital' or 'Analog'.2.
Press the 'ENTER' button to set the selection.3.
Hold the 'ESC' button to return to normal operation.4.
Tx Power (LPW)
Ch 1
KNG - P25
171.58500 MHz
MON T/A MENU TXD
TXD
Ch 1
KNG - P25
171.58500 MHz
MON T/A MENU TXD
TXD
If Tx Power selection is enabled, transmit
power can be switched between the high
power and the pre-programmed low power
setting.
Toggle switch operation:
High - Slide the programmed switch toward the front of the radio.
Low - Slide the switch up toward the channel select switch.
Button Operation:
High - Press the programmed button.
LPW
Low - Press the button again. LPW