User's Manual

68
KNG User’s Manual
69
RELM/BK Radio
TX Time Out Timer
The TX Time Out Timer Limits the length of transmissions to the
programmed time.
Tx Timeout
255 Seconds
ESC ▲ ▼ ENT
Busy Ch Mode
TX TOT
Bklight Mode
ESC ▲ ▼ ENT
1. With 'TX TOT' highlighted, press the 'ENT'
button.
2. Use the up/down buttons to select the
desired transmission time Limit. (0 - 225
seconds. Zero seconds = No Time Out Time.)
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Global Programming menu.
Backlight Mode
Bklight Mode
Off
→
Keypress
ESC ▲ ▼ ENT
TX TOT
Bklight Mode
Bklight Dur
ESC ▲ ▼ ENT
1. With 'Bklight Mode' highlighted, press the
'ENT' button.
2. Use the up/down buttons to highlight the
desired Backlight setting.
Off = No Backlight.
Keypress = Display and keypad light whenever
the keypad is used.
Display Chan = Display and keypad light
whenever displayed information changes
Both = Display and keypad light whenever
displayed information changes or the keypad
is used.
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Global Programming menu.
Backlight Duration
Backlight Dur
Off
→
1 Sec
ESC ▲ ▼ ENT
TX TOT
Bklight Mode
Bklight Dur
ESC ▲ ▼ ENT
1. With 'Bklight Dur' highlighted, press the
'ENT' button.
2. Use the up/down buttons to select the
desired Backlight Time Limit. (1 - 6 seconds,
Off or Always On)
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Global Programming menu.
Battery Saver
It is recommended that Battery Saver be used for normal radio
operation.
Battery Saver
Off
→
On
ESC ▲ ▼ ENT
Bklight Mode
Bklight Dur
Battery Saver
ESC ▲ ▼ ENT
1. With 'Battery Saver' highlighted, press the
ENT button.
2. Use the up/down buttons to select 'On' or
'Off'.
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Global Programming menu.
Password
Password
123456
ESC CLR ENT
Bklight Dur
Battery Saver
ANI ID
ESC ▲ ▼ ENT
ESC CLR ENT
Password
1. With 'Password' highlighted, press the
'ENT' button.
2. Press the 'CLR' button to clear the current
Password.
3. Use the keypad to select a desired six digit
numeric Password.
4. Press the 'ENT' button to set the new
Password.
5. Press the 'ESC' button to return to the
Global Programming menu.