User's Manual

64
KNG User’s Manual
65
RELM/BK Radio
Automatic Number IdentiÞ cation (ANI) ID
ANI ID
1234567
ESC CLR ENT
Pri 2 Chan
ANI Mode
ANI ID
ESC ▲ ▼ ENT
ESC CLR ENT
ANI ID
789
1. With 'ANI ID' highlighted, press the ENT
button.
2. Press the 'CLR' button to clear the ID.
3. Use the keypad to select the desired
numeric ID. (Up to seven digits.)
4. Press the 'ENT' button to save the ID.
5. Press the 'ESC' button to return to the
Zone Programming menu.
Disable Zone Cloning
If enabled, the Zone will not accept incoming clone from another radio.
Disable Clone
→
Off
On
ESC ▲ ▼ ENT
ANI Mode
ANI ID
Disable Clone
ESC ▲ ▼ ENT
1. With 'Disable Clone' highlighted, press the
'ENT' button.
2. Use the up/down buttons to highlight the
desired setting.
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Zone Programming menu.
Programming Global Parameters
Pri 1 Chan
Pri 1 Zone
Tx on Pri 1
ESC ▲ ▼ ENT
Enter Password
000000
ESC CLR ENT
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
RXD SCAN
User TGIDs
User Tones
Keypad Prog
ESC ▲ ▼ ENT
Talkaround
Tx Power
Prog
ESC ▲ ▼ ENT
Channels
Zone Params
Global Params
ESC ▲ ▼ ENT
To enter the Global Programming mode:
1. Press the MENU button.
2. Use the up/down arrows to highlight 'Prog'.
3. Press 'ENT'.
4. Use the up/down arrows to highlight 'Keypad
Prog'.
5. Press 'ENT'.
6. Use the keypad to enter the six digit
password.
7. Press 'ENT'.
8. Use the up/down arrows to highlight 'Global
Params'
9. Press 'ENT'.
10. Use the up/down arrows to select the
function you wish to edit.
Programmable Global functions include: Priority
1 Channel, Priority 1 Zone, Transmit on Priority
1 Channel, Priority 2 Channel, Priority 2 Zone,
Scan Hold Time, Busy Channel Mode, Transmit
Time-out-Timer, Backlight Mode, Backlight
Duration, Battery Saver, and Radio Password.
Global Priority 1 Channel
Pri 1 Channel
Off
→
Main
ESC ▲ ▼ ENT
Pri 1 Chan
Pri 1 Zone
Tx on Pri 1
ESC ▲ ▼ ENT
1. With 'Pri 1 Chan' highlighted, press the
ENT button.
2. Use the up/down buttons to highlight the
desired Priority Channel.
Off = No Global Priority Channel.
Main = Global Priority 1 Channel follows
channel select knob.
Channel Label = Assign as Priority 1 Channel.
4. Press the 'ENT' button to set the selection.
5. Press the 'ESC' button to return to the
Global Programming menu.