User's Manual

60
KNG User’s Manual
61
RELM/BK Radio
Encryption Key (Encrypted models)
Encryption keys must loaded with a compatible key Þ ll device. The
radio can hold up to 32 AES and/or DES keys. (See Encryption
Operation)
Secure Mode
Key
Key Lock
ESC ▲ ▼ ENT
Encryption Key
01
ESC CLR ENT
TGID 01
01
ESC CLR ENT
1. With 'Key' highlighted, press the 'ENT'
button.
2. Press the 'CLR' button to clear the
currently selected encryption key.
3. Use the keypad to select the desired
Encryption Key number. (01-32)
4. Press the 'ENT' button to set the
Encryption Key.
5. Press the 'ESC' button to return to the
Channel Programming menu.
Encryption Key Lock (Encrypted models)
Encryption Keys can be locked to a channel or selected via a
programmed button.
Key Lock
→
Off
On
ESC ▲ ▼ ENT
Secure Mode
Key
Key Lock
ESC ▲ ▼ ENT
1. With 'Key Lock' highlighted, press the 'ENT'
button.
2. Use the up/down buttons to highlight the
desired setting. Off = Selectable Key, On =
Locked Key.
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Channel Programming menu.
Low Power Lock
Low Pow Lock
→
Off
On
ESC ▲ ▼ ENT
Key
Key Lock
Low Pow Lock
ESC ▲ ▼ ENT
Channels with Low Power Lock enabled ignore
the Hi/Lo power switch and operate in Low
Power only.
1. With 'Low Pow Lock' highlighted, press the
'ENT' button.
2. Use the up/down buttons to highlight the
desired setting. Off = Selectable Power, On =
Low Power Only.
3. Press the 'ENT' button to set the selection.
4. Press the 'ESC' button to return to the
Channel Programming menu.
Programming Zone Parameters
Zone Label
Pri 1 Chan
Tx on Pri 1
ESC ▲ ▼ ENT
Enter Password
000000
ESC CLR ENT
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
RXD SCAN
User TGIDs
User Tones
Keypad Prog
ESC ▲ ▼ ENT
Talkaround
Tx Power
Prog
ESC ▲ ▼ ENT
Channels
Zone Params
Global Params
ESC ▲ ▼ ENT
Select Zone
Zone #
Zone Label
ESC ▲ ▼ ENT
To enter the Zone Programming mode:
1. Press the MENU button.
2. Use the up/down arrows to highlight 'Prog'.
3. Press 'ENT'.
4. Use the up/down arrows to highlight 'Keypad
Prog'.
5. Press 'ENT'.
6. Use the keypad to enter the six digit
password.
7. Press 'ENT'.
8. Use the up/down arrows to highlight 'Zone
Params'
9. Press 'ENT'.
8. Use the up/down arrows to select the desired
Zone.
9. Press 'ENT'.
10. Use the up/down arrows to select the func-
tion you wish to edit.
Programmable Zone functions include: Zone
Label, Priority 1 Channel, Transmit on Priority 1
Channel, Priority 2 Channel, Automatic-Number-
IdentiÞ cation (ANI) settings and Allow/Disallow
Cloning.