User's Manual

50
KNG User’s Manual
51
RELM/BK Radio
Editing the label
ESC CLR ▼ ENT
Call 1
C a l l 1 L a b e l
1234567
ESC CLR PR1 ENT
Call 1
1234567
1. Use the down arrow button to highlight the
label.
2. Press the CLR button to clear the label.
3. Use the keypad to select the desired
character. (See Keypad Character Chart.)
4. Press the PR1 button to move to the next
character. Labels can contain up to thirteen
characters.
5. Press the ENT button to save the label.
Editing the ID Number
ESC CLR ▼ ENT
Call 1
C a l l 1 L a b e l
1234567
ESC CLR ENT
Call 1
Call 1 Label
1234567
1. Use the down arrow button to highlight the
ID.
2. Press the CLR button to clear the ID.
3. Use the keypad to select the desired ID
number. (Up to seven digits.)
4. Press the ENT button to save the ID.
Programming User Selectable Transmit Tones
The KNG can be pre-programmed with up to 32, user selectable, CTCSS
or CDCSS subaudible transmit tones. Tones are selected with the
programmed buttons. If enabled, the tones can be programmed via the
radio's keypad.
To enter Tone List programming:
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
RXD SCN
Talkaround
Tx Power
Prog
ESC ▲ ▼ ENT
Enter Password
000000
ESC CLR ENT
Call List
User Tones
User TGIDs
ESC ▲ ▼ ENT
User Tones
TONE-01
TONE-02
ESC ▲ ▼ ENT
TONE 01
12345
ESC CLR ENT
TONE 01
0
ESC CLR ENT
1. Press the Menu button.
2. Use the up/down buttons to highlight 'Prog'.
3. Press the '' button.
4. Use the up/down buttons to highlight 'User
Tones'.
5. Press 'ENT'.
6. Use the keypad to enter the six digit
password.
7. Press 'ENT'.
8. Use the up/down buttons to highlight the
User Tone you wish to edit.
9. Press 'ENT'.
10. Press the 'CLR' button to clear the currently
programmed tone.
11. To enter CTCSS tones use the keypad to
enter the tone in Hertz. (67.0 - 255 Hz) To enter
CDCSS tones press the # key then enter the
three digit code. (000 - 999)
12. Press the 'ENT' button to set the tone.