User's Manual

48
KNG User’s Manual
49
RELM/BK Radio
Keypad Programming Options
If enabled via PC programming, the radio's Picklists and Individual Call
List information can be edited using the keypad. In addition, programmed
channel, zone and some global settings can also be programmed. Check
with your RELM / B K Radio dealer or communic ations of Þ cer for information
on the programmed functions of your radio.
Programmable categories include Individual P25 ID Quick Call/Receive
List, User Tone List, User NAC List, User Talk Group ID List and Keypad
Programming of Channel, Zone and Global radio parameters.
Programming P25 ID Unit Call/Receive List
The KNG can be pre-programmed with up to 100 Project 25 IDs and labels.
If 'RX'd Unit ID' is designated as a display line, the P25 ID of the radio
sending the call will be shown when receiving a digital signal. If the P25 ID
of the received call is programmed in the Call List, the alphanumeric label
associated with the ID will be displayed. If the P25 ID is not in the Call List,
the numeric P25 ID will be displayed.
Ch 1
KNG-P150 P25
171.58500 MHz
LIGT T/A MENU LCK
RXD SCN
Keypad Prog
User Tones
Call List
ESC ▲ ▼ ENT
Enter Password
000000
ESC CLR ENT
ESC ▲ ▼ ENT
Call List
Call 1
Call 2
Talkaround
Tx Power
Prog
ESC ▲ ▼ ENT
To enter P25 Call List programming:
1. Press the Menu button.
2. Use the up/down buttons to highlight Prog.
3. Press the ENT button.
4 Use the up/down buttons to highlight Call List.
5. Press ENT.
6. Use the keypad to enter the six digit
password.
7. Press ENT.
8. Use the up/down buttons to highlight the P25
ID you wish to edit.
9. Press ENT. The display shows the
alphanumeric label and P25 ID of the selected
ID.
Picklist – Key Set (UKST)
Selecting a Key Set from the Pick List will cause the radio to use
encryption keys from the selected Key Set.
Key Set
→
Default
Keyset 1
ESC ▲ ▼ ENT
Ch 1
KNG-P150 P25
171.58500 MHz
RKY T/A MENU LCK
RXD SCN
Button Operation
Press the programmed button. 1. UKST
Use the up/down buttons to select the 2.
desired Key Set (1-32) or select the tone
using the numeric keypad.
'Default' = pre-programmed key set.
Press the 'ENT' button to set the 3.
selection.
Press 'ESC' to return to normal 4.
operation.
Key Set
→
Default
Keyset 1
ESC ▲ ▼ ENT
Ch 1
KNG-P150 P25
171.58500 MHz
ZER T/A MENU LCK
RXD SCN
Talkaround
Tx Power
Key Set
ESC ▲ ▼ ENT
Menu Operation
Press the assigned Menu button.1.
Use the up/down buttons to select 'Key 2.
Set'.
Press the 'ENT' button.3.
Use the up/down buttons to select the 4.
desired Key (1-32) or select the tone using
the numeric keypad.
'Default' = pre-programmed key set.
Press the 'ENT' button to set the 5.
selection.
Press the 'ESC' button twice to return to 6.
normal operation.