User's Manual

46
KNG User’s Manual
47
RELM/BK Radio
Picklist – TGID (UTG)
Selecting a Talk Group ID from the Pick List will assign the TGID to
the currently select channel. All other channels are unaffected.
User NACs
→
Off
TONE-01
ESC ▲ ▼ ENT
Ch 1
KNG-P150 P25
171.58500 MHz
RKY T/A MENU LCK
RXD SCN
Button Operation
Turn to the channel you wish to assign 1.
the TGID to.
Press the programmed button. 2. UTG
Use the up/down buttons to select the 3.
desired tone (1-32) or select the tone using
the numeric keypad.
'Default' = pre-programmed TGID.
Press the 'ENT' button to set the 4.
selection.
Press 'ESC' to return to normal 5.
operation.
User TGID
→
Default
TGID-01
ESC ▲ ▼ ENT
Ch 1
KNG-P150 P25
171.58500 MHz
ZER T/A MENU LCK
RXD SCN
Talkaround
Tx Power
User TGIDs
ESC ▲ ▼ ENT
Menu Operation
Press the assigned Menu button.1.
Use the up/down buttons to select 'User 2.
TGID'.
Press the 'ENT' button.3.
Use the up/down buttons to select the 4.
desired TGID (1-32) or select the tone using
the numeric keypad.
'Default' = pre-programmed TGID.
Press the 'ENT' button to set the 5.
selection.
Hold the 'ESC' button to return to 6.
normal operation.
Picklist – Key (UKEY)
Selecting an Encryption Key from the Pick List will assign the Key
to all encrypted channels that do not have 'Key Lock' programmed.
Locked key channels will continue to use the pre-programmed key.
TX Keys
→
Default
Key 1
ESC ▲ ▼ ENT
Ch 1
KNG-P150 P25
171.58500 MHz
RKY T/A MENU LCK
RXD SCN
Button Operation
Turn to the channel you wish to assign 1.
the Tx Encryption Key to.
Press the programmed button. 2. UKEY
Use the up/down buttons to select the 3.
desired key (1-32) or select the tone using
the numeric keypad.
'Default' = pre-programmed key.
Press the 'ENT' button to set the 4.
selection.
Press 'ESC' to return to normal 5.
operation.
TX Keys
→
Default
Key 1
ESC ▲ ▼ ENT
Ch 1
KNG-P150 P25
171.58500 MHz
ZER T/A MENU LCK
RXD SC N
Talkaround
Tx Power
Tx Keys
ESC ▲ ▼ ENT
Menu Operation
Press the assigned Menu button.1.
Use the up/down buttons to select 'Tx 2.
Keys'.
Press the 'ENT' button.3.
Use the up/down buttons to select the 4.
desired Key (1-32) or select the tone using
the numeric keypad.
'Default' = pre-programmed key.
Press the 'ENT' button to set the 5.
selection.
Hold the 'ESC' button to return to 6.
normal operation.